Deformation and Degradation of Superelastic NiTi Under Multiaxial Loading

Abstract

The degradation of the superelastic properties of a commercial NiTi alloy is studied during uniaxial, biaxial and load-path-change cycling performed in-situ with synchrotron X-ray diffraction. Careful examination of the diffraction pattern during uniaxial loading shows the R-phase as a transition between the austenite and the B19 0 martensite. Degradation of the superelasticity is found to depend strongly on the loading and unloading path followed, and it is discussed in terms the B19 0 martensitic variant selection, the accumulation of dislocations, and the residual R-Phase and B19' martensite. Cycling biaxially leads to faster degradation than uniaxially due to a larger accumulation of dislocations. If the deformation cycle contains a load path change, dislocation accumulation increases further and more martensite is retained.