Data-Driven Calibration of Rough Heat Transfer Prediction Using Bayesian Inversion and Genetic Algorithm

Abstract

The prediction of heat transfers in Reynolds-Averaged Navier–Stokes (RANS) simulations requires corrections for rough surfaces. The turbulence models are adapted to cope with surface roughness impacting the near-wall behaviour compared to a smooth surface. These adjustments in the models correctly predict the skin friction but create a tendency to overpredict the heat transfers compared to experiments. These overpredictions require the use of an additional thermal correction model to lower the heat transfers. Finding the correct numerical parameters to best fit the experimental results is non-trivial, since roughness patterns are often irregular. The objective of this paper is to develop a methodology to calibrate the roughness parameters for a thermal correction model for a rough curved channel test case. First, the design of the experiments allows the generation of metamodels for the prediction of the heat transfer coefficients. The polynomial chaos expansion approach is used to create the metamodels. The metamodels are then successively used with a Bayesian inversion and a genetic algorithm method to estimate the best set of roughness parameters to fit the available experimental results. Both calibrations are compared to assess their strengths and weaknesses. Starting with unknown roughness parameters, this methodology allows calibrating them and obtaining between 4.7% and 10% of average discrepancy between the calibrated RANS heat transfer prediction and the experimental results. The methodology is promising, showing the ability to finely select the roughness parameters to input in the numerical model to fit the experimental heat transfer, without an a priori knowledge of the actual roughness pattern.

Application of Adaptive Genetic Algorithm in Optimal Scheduling of Aviation Materials

“…In this process, the population will continue to evolve, and the search will be biased towards better areas in the space, and finally an optimal population will be calculated. When solving the optimal solution problem, the individual with the highest fitness function evaluation is the answer [16]. At present, there are many optimization algorithms under the category of genetic algorithms, among which the nondominated sorting genetic algorithm II (NSGA-II) is a mainstream algorithm, and NSGA-II is also used as the core in the aviation material optimization scheduling model.…”

Data-driven model for calculating capacity efficiency margins for distribution substations

“…Based on line topology identification techniques, data-driven techniques are used to design a dynamic optimal tide framework [5][6]. The distribution substation area generates a huge amount of data every day, which is collected by sensors and stored in a database.…”