Cyclic approximation of the heat equation in finite strains for the heat build-up problem of rubber

Abstract

It is well-known that rubber exhibits hysteretic mechanical behavior and has a low thermal conductivity. The main consequences are the heat generation and heat build-up phenomena which occur in a rubber component when subjected to repeated deformations. Estimating the heat build-up temperature implies the solution of a coupled thermomechanical problem. Due to the difference between the mechanical and the thermal diffusion characteristic times, a cyclic uncoupled approach is often used to solve the heat build-up problem.In the uncoupled approach, the heat sources are first determined with a mechanical analysis, and the heat equation is then solved on a fixed geometry. At finite strains, the geometry of the body varies with the deformation but the foregoing method does not account for such changes in geometry. The exact solution would require describing the body deformation while solving the thermal problem, but this does not take advantage of the difference between the characteristic times of the thermal diffusion and the mechanical behaviour, respectively, and the exact numerical resolution is therefore unnecessarily time-consuming.The purpose of the current work is to take into account kinematics in the thermal problem when using a cyclic uncoupled approach. The heat problem is written in the reference configuration. That implies that the problem is defined on a fixed domain: the initial configuration of the body. The changes in geometry in the reference heat equation are thus described by mechanical time-dependent variables. The cyclic assumption allows mean variables to be defined, for example the mean temperature. A timeintegration method and an approximation of the heat equation are developed, leading to a simplified formulation with mechanical time-independent terms. This simplified heat problem is based on the mean variables.

Fatigue initiation mechanisms in elastomers: a microtomography-based analysis

“…To predict the dissipated energy, Le Chenadec et al [26] model can be used. This approach is based on the idea to relate the cyclic hyperelastic energy to the dissipated energy.…”

Determination of dissipated energy fields from temperature mappings on a rubber-like structural sample: Experiments and comparison to numerical simulations

“…To predict the dissipated energy, a very simple yet efficient approach is used here, suggested by Le Chenadec et al (2009). This approach is based on the idea to relate the cyclic hyperelastic energy to the dissipated energy throughout Eq.…”

“….). Moreover, the displacements involved are usually very large, making difficult to follow the same material configuration (Pottier et al, 2009;Le Chenadec et al, 2009). Another difficulty for these organic materials comes from the thermal dependency of the constitutive response, leading to a coupling when the temperature increases.…”

Estimation of stress and displacement increase caused by heat generation in rubber vibration absorber

“…The question of determining the temperature fields of self-heating is widely covered in the literature, but the question of estimating the magnitude of temperature stresses and deformations is poorly known, it is usually mentioned that these stresses are small [3][4][5][6][7][8].…”