Crosstalk elimination in the detection of dual-beam optical tweezers by spatial filtering

Abstract

In dual-beam optical tweezers, the accuracy of position and force measurements is often compromised by crosstalk between the two detected signals, this crosstalk leading to systematic and significant errors on the measured forces and distances. This is true both for dual-beam optical traps where the splitting of the two traps is done by polarization optics and for dual optical traps constructed by other methods, e.g., holographic tweezers. If the two traps are orthogonally polarized, most often crosstalk is minimized by inserting polarization optics in front of the detector; however, this method is not perfect because of the de-polarization of the trapping beam introduced by the required high numerical aperture optics. Here we present a simple and easy-to-implement method to efficiently eliminate crosstalk. The method is based on spatial filtering by simply inserting a pinhole at the correct position and is highly compatible with standard back focal plane photodiode based detection of position and force. Our spatial filtering method reduces crosstalk up to five times better than polarization filtering alone. The effectiveness is dependent on pinhole size and distance between the traps and is here quantified experimentally and reproduced by theoretical modeling. The method here proposed will improve the accuracy of force-distance measurements, e.g., of single molecules, performed by dual-beam optical traps and hence give much more scientific value for the experimental efforts.

Cancer cells’ ability to mechanically adjust to extracellular matrix stiffness correlates with their invasive potential

“…Data were acquired by an acquisition card (NI PCI-6040E) at a sampling frequency of 22 kHz and processed by custom-made LabVIEW programs (LabVIEW 2010; National Instruments). For the distances traveled by a trapped granule, the voltage output from the photodiode is linearly related to particle displacement with respect to the laser focus ( Ott et al. , 2014 ).…”

Basement membrane stiffness determines metastases formation

“…Data were recorded by an acquisition card (NI PCI-6040E) at a sampling frequency of 22 kHz and processed by LabVIEW software (LabVIEW 2010, National Instruments). For the small thermal fluctuations of lipid granules the voltage output of the photodiode is linearly related to particle displacement with respect to the laser focus 70 . The positional time series were Fourier transformed and the power spectrum was analysed in Matlab R2016a (MathWorks) as described previously 71 .…”

Optical Trapping of Gold Nanoparticles in Air

“…Using the quadrant photodiode, we measured the thermal fluctuations of the nanoparticle in the optical trap (Figure a). In accordance with common practice from trapping particles in liquids and new results from trapping micron-particles in air, we assume that the positions measured in volts by the photodiode, x V , are proportional to the metric displacement of the particle in the trap, x m : x m = β x V .…”