Crosslinked and Filled Composites Based on Polyolefins

Abstract

The paper gives an overview of literary material of a number of authors on the problem of the preparation of modified polyolefins during the crosslinking process. It is shown that materials based on polyolefins, characterized by increased heat-resistance favoring improvement of complex of technical requirements for light resistance, reliability, manufacturability in respect to the production and use of cable-conduction products. In particular, experimental data are presented on the use of organosilicon tin carboxylate in order to obtain products with the best quality characteristics. The results of theoretical and experimental investigations of the influence of formulation of polyolefin compositions on the kinetics of the crosslinking process and also on rheological and thermophysical properties are presented. The principal possibility of studying the influence of the irradiation dose on the regulation of the process of changing the structure of composites is considered.As shown by a number of authors, this method makes it possible to purposefully approach the development of crosslinked composite materials with predetermined properties. The method of radiation-chemical cross-linking compares the structure of the polymer base in the presence and without different types of fillers in highly filled composites. The data on the effect of radiation cross-linking conditions on the mesh density and the mechanical properties of cross-linked polyethylene at high temperatures are presented. The data on the chemical stability of cross-linked polyethylene to the action of various chemical reagents such as acetone, benzene, toluene, carbon tetrachloride, diethyl ether, benzene-76 and lubricants are given. One of the important circumstances in the study of the structure and properties of polymer composites is the possibility of mathematical modeling of viscoelastic compliance of thick-cross-linked polymers in correlation with the methodology of its theoretical parametric identification with subsequent prediction of the results of the thermomechanical experiment.Forcitation:Mammadli U.M. Crosslinked and filled composites based on polyolefins. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2018. V. 61. N6. P. 4-16