Criteria for prediction of plastic instabilities for hot working processes: Part II. Characterization of plastic flow of medium carbon microalloyed steel using phenomenological and continuum criteria

Abstract

To cite this article: A. Al Omar , I. Alcelay & J. M. Prado (2012) Criteria for prediction of plastic instabilities for hot working processes: Part II. Characterization of plastic flow of medium carbon microalloyed steel using phenomenological and continuum criteria, Welding International, 26:12, 935-943,In the study of hot working processes, the knowledge of interaction between microstructural behaviour and control process parameters such as temperature, strain rate, and strain is very important. In the last decades, processing maps have been developed to design, control, and optimize the hot strain of various metallic materials. In this work, to study the hot workability of medium carbon microalloyed steel, during hot compression tests, a comparative study between two types of processing maps constructed using phenomenological and thermodynamic continuum criteria has been carried out. The analysis of the maps indicates that the studied steel does not undergo any type of plastic instability. However, the maps corresponding to the strain of 1 ¼ 0.6 reveal a domain of dynamic recrystallization, considered as the more efficient domain within the 'safe' region process. This domain is centred at 11508C and 10 s 21 . Also, the comparative study of the obtained results shows the difference between the positions of plastic strain domains predicted by the two criteria.

Hot Deformation Behavior of 4130 High-Strength Steel

“…The numbers on the contour lines signifies the percent efficiency of the power dissipation . They are directly related to the process of microstructural evolution of the material, such as DRX, grain coarsening or DRV [ 45 , 46 , 47 ]. The areas of the flow instability characterize inhomogeneous deformation, which should be avoided when designing hot processing conditions.…”