Creep behavior of cemented sand investigated under cyclic loading

Abstract

The influence of stress state on the creep behavior of an artificial cemented sand resembling soft rocks was evaluated. The stress state was characterized by a mean stress and a stress ratio. The cyclic stress-induced creep test was adopted in this study, where the cyclic loading involved a constant deviator stress and a cyclic mean stress (or confining pressure) of the same amplitude and period; the test indicated similar trends as the conventional creep test with a shorter time to creep failure at less creep strain. Results showed that when the creep strain is large enough, the greater the creep strain accumulates, the smaller is the post-creep strength. Under the same number of cyclic loads, with the same stress ratio, the creep strain and the steady-state strain rate in the secondary creep stage increase with increasing mean stress; with the same mean stress, the two said parameters also increase with increasing stress ratio. It was also found that the time to reach creep failure decreases with decreasing mean stress and increasing stress ratio. The stress ratio is proposed to account for the tendency of a stress state to cause failure, and the cyclic variation of mean stress, which is equivalent to the effective mean stress with pore water pressure being zero in the tests conducted, reflects the effective stress state of a geomaterial under fluctuations of groundwater table. Under a fixed deviator stress, a soft porous geomaterial subjected to cyclic variation of effective mean stress may yield contraction and could lead to failure if the stress ratio is high. The findings can help explain the mechanism of ground subsidence or slope failure subjected to cyclic fluctuations of groundwater table.