Creating high levels of gas production from Waste Mushroom Substrate Pellets

Abstract

This study was to investigate the use of waste mushroom substrate (WMS) material, and waste mushroom substrate pellets (WMSP), with two catalysts (K 2 CO 3 and CaO), as biofuel feed to produce CH 4 in an updraft gasifier. The WMS was made from composted rubber wood chips which had been used for mushroom bed log culture, and pelletizing the WMS (WMSP) to create a biomass with a greater bulk density than the normal WMS. The gasification was determined in the high temperature range of 400-800 0 C by dry fuel feeding at the rate of 25 kg/ha. The results showed that the optimum operation was achieved with WMSP with K 2 CO 3 as the catalyst, at ER = 0.11. The combination of WMSP and K 2 CO 3 produced more CH 4 at 62.2 and 15.27% than single WMS and WMSP, respectively. WMSP with CaO as the catalyst produced 29.65 % less CH 4 than WMSP. Based on gasification equation, CO produced from WMSP was calculated 24.116 % wt, 31.52% wt from WMSP with K 2 CO 3 and 19.21% wt from WMS. The amount of gas produced from the available waste material as the biomass was sufficient to meet all heating requirements of the mushroom production.