Coupling support technique for coal roadway under double gobs in close coal seams

Abstract

In the process of lower coal roadway support under double gobs in close coal seams, there are problems such as the whole destruction of the lower coal seam and the intermediate strata, the thin roof of the lower coal roadway with the smaller support space, the upper rock of the lower coal roadway without anchor bearing layer, the roof falling, the anchor cable offing, and so on. On the basis of the engineering background of No. 11103 haulage roadway in Fenxi coal mine, the research methods of theoretical modeling analysis, numerical simulation analysis and field engineering test are comprehensively adopted. In this paper, the layout of the roadway with floor insertion in the lower coal seam, the distribution characteristics of surrounding rock deviatoric stress, the control principle of broken surrounding rock and the coupling support method of shed–cable–prop are systematically studied. The study shows that many measures are needed to ensure the stability of the surrounding rock in the strong mining roadway of the lower coal seam. The lower coal seam roadway section was modified from the original rectangular section to adopt an arched section to counteract the broken roof. The staggered position of the lower coal seam roadway layout was modified from the original coal roadway position to a coal–rock roadway, so as to avoid the area of high deviatoric stress in the coal pillar and the area of crushed coal body, and to leave an effective support space for the roof. The support scheme of the lower coal seam roadway was improved to use anchor cable and single prop to support the weak section of U‐type steel shed with local coupling, and realize unequal force coupling by adjusting the size of the force at different coupling points. In the field monitoring the deformation of the roadway is small, and the support effect is good.