Correction to: Cold Spray: Over 30 Years of Development Toward a Hot Future

Guo, Deliang; Kazasidis, Marios; Hawkins, A.; Fan, Ningsong; Leclerc, Z.; MacDonald, Daniel W.; Nastić, A.; Nikbakht, Roghayeh; Ortiz-Fernandez, R.; Rahmati, Sadegh; Razavipour, Maryam; Richer, P.; Yin, Shuo; Lupoi, Rocco; Jodoin, B.

doi:10.1007/s11666-022-01427-8

Cited by 3 publications

(2 citation statements)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The cold spray has been around for approximately 30 years in the restoration and repair areas and has undergone exciting and unprecedented development steps [40]. In fact, by concentrating on innovative solutions to remove current barriers that prevent the system from achieving its full potential, cold spray technology may be expanded to a much more comprehensive range of applications and achieve a higher degree of industrial adoption [41].…”

Section: Challenges Of Cold Spray and Mitigation Strategiesmentioning

confidence: 99%

“…Numerous experiments have been conducted to enhance cold spray technique and increase deposition efficiency. After 30 years of research and development, cold spray technology has made many scientific and technological advancements, including new materials, fresh concepts, advanced cold spray apparatus configurations, new preand post-process treatment techniques, and new bonding methods as new applications [40]. However, there are still a few key challenges in the cold spray process: delamination, crack, and residual stress.…”

Section: Challenges Of Cold Spray and Mitigation Strategiesmentioning

confidence: 99%

See 1 more Smart Citation

Remarkable Potential of Cold Spray in Overlay Restoration for Power Plants: Key Challenges, Recent Developments, and Future Prospects

Afandi,

Mahalingam,

Tan

et al. 2023

Coatings

View full text Add to dashboard Cite

Cold spray has become a prominent deposition technology for coating, repair, and restoration in many industries, such as the aerospace, automotive, and power generation industries. It also has the potential to be used as an alternative overlay restoration for power plant components as it has minimal thermal distortion phase changes, as compared to conventional welding and thermal spray. This article aims to bridge the gap in the scientific literature by presenting a comprehensive review of cold spray in the context of power plant components. Firstly, this review examines the challenges of cold spray and subsequently elucidates effective mitigation strategies. Secondly, the review analyses the recent development of cold spray in the field of coating application. Moving forward, it investigates the integration of cold spray technology in repair applications, focusing on practical implementation and effectiveness. Finally, the review presents the overall impact of cold spray, its current outlook, and discusses future prospects. As such, the review will provide the community with a broad understanding of cold spray applications in the power plant sector.

show abstract

Section: Challenges Of Cold Spray and Mitigation Strategiesmentioning

confidence: 99%

Section: Challenges Of Cold Spray and Mitigation Strategiesmentioning

confidence: 99%

Remarkable Potential of Cold Spray in Overlay Restoration for Power Plants: Key Challenges, Recent Developments, and Future Prospects

Afandi,

Mahalingam,

Tan

et al. 2023

Coatings

View full text Add to dashboard Cite

show abstract

Microstructural Nano-Scale Evolution at Inter-Particles Bonding Interface of Cold-Sprayed Ti6Al4V Deposits During Heat Treatment

Yang,

Wang,

Luo

et al. 2023

J Therm Spray Tech

View full text Add to dashboard Cite

A Comparative Study on Wear Resistance of Cold-Sprayed Aluminum/Quasicrystal Composite Coatings

Jafari,

Cizek,

Lukac

et al. 2024

J Therm Spray Tech

View full text Add to dashboard Cite

Cold spray (CS) technology has proven a great potential in the production of composite coatings, enabling the production of materials with superior qualities such as enhanced tribological behavior. This study aims to investigate the tribological properties of CS Al-based composite coatings reinforced by quasicrystalline (QC) particles. Two different Al alloys were used as the matrix, AA 6061 and AA 2024, and mixed with Al-based QC particles (Al-Cr-Fe-Cu) at different Al/QC ratios. A room-temperature ball-on-disc test was then used to evaluate the wear resistance of the composite CS coatings in air and compared to those of the non-reinforced Al alloy CS coatings as well as a cast counterpart (AA 6061-T6). We have demonstrated that CS could be employed to produce thick and dense Al-QC composites that can retain up to about 50 wt.% QC reinforcement in the structure. The incorporation of the QC particles increased the wear resistance by a factor of 7.

show abstract

Correction to: Cold Spray: Over 30 Years of Development Toward a Hot Future

Cited by 3 publications

References 0 publications

Remarkable Potential of Cold Spray in Overlay Restoration for Power Plants: Key Challenges, Recent Developments, and Future Prospects

Remarkable Potential of Cold Spray in Overlay Restoration for Power Plants: Key Challenges, Recent Developments, and Future Prospects

Microstructural Nano-Scale Evolution at Inter-Particles Bonding Interface of Cold-Sprayed Ti6Al4V Deposits During Heat Treatment

A Comparative Study on Wear Resistance of Cold-Sprayed Aluminum/Quasicrystal Composite Coatings

Contact Info

Product

Resources

About