Correction of Interferometric and Vegetation Biases in the SRTMGL1 Spaceborne DEM with Hydrological Conditioning towards Improved Hydrodynamics Modeling in the Amazon Basin

In the Amazon basin, floodplains form a complex mosaic of freshwater systems with differing morphologies, resulting in varied inundation patterns and heterogeneous chemical and ecological characteristics. In this study, we focused on the Janauacá floodplain, a medium‐sized system (786 km2, including the local watershed) located along the Solimões River. Based on in situ and satellite observations acquired from November 2006 to November 2011, we computed water fluxes between the mainstream and the floodplain and examined the temporal dynamics of floodplain storage from river flooding, rainfall, runoff, and exchanges with groundwater through bank seepage for the 5 years from 2006 to 2011. The mainstream was the main input of water to the flooded area, accounting on average for 93% of total water inputs by the end of the water year. Direct precipitation and runoff from uplands contributed less than or equal to 5% and 10%, respectively. The seepage contribution was less than 1%. Model uncertainties, evaluated using Monte Carlo analysis of the input data and model parameters, showed that all water fluxes were relatively well constrained except for outflow through seepage, which had a standard deviation across simulations greater than 60%. The water balance computation was verified using electrical conductivity as an assumed non‐reactive tracer. Except during periods of very low water, the simulated and measured conductivities agreed well. Moreover, conductivity data analysis confirmed that the Janauacá system can be considered homogeneous in terms of electrical conductivity for filling percentages equal to or greater than 40% (i.e., when the water level is above 19.5 m, generally from April to August) but presented large heterogeneities during the rest of the hydrological cycle.

show abstract

“…

italicTK = 3, 600 {(0.868 \frac{L^{3}}{Δ z_{b}})}^{0.385}

. Here, L and Δ z b were estimated to be 96 km and 31 cm/km, respectively (Pinel et al, ). Finally,

Q_{nw} = Q_{{nw}_{normalS}} + Q_{{nw}_{SS}} + Q_{{nw}_{normalB}}

.…”

Section: Methodsmentioning

confidence: 53%

“…Local studies over South America have reported a negative SRTMGL1 bias of 7 m (Satge et al, ). In their study, Pinel et al, () determined that the root‐mean‐square error decreased from 4.6 m for the SRTMGL1 DEM to 1.7 m for the generated DEM, after comparing the DEMs against in situ data.…”

Section: Methodsmentioning

confidence: 99%

Amazonian floodplain water balance based on modelling and analyses of hydrologic and electrical conductivity data

et al. 2017

Self Cite

View full text Add to dashboard Cite

show abstract

“…All DEMs produced using SAR interferometry are too high over vegetated areas due to the vegetation bias [1,11]. The magnitude of this shift depends on the vegetation height, tree crown shape and vegetation density.…”

Section: Discussionmentioning

confidence: 99%

Evaluation of Vertical Accuracy of the WorldDEM™ Using the Runway Method

2016

View full text Add to dashboard Cite

Accuracy assessment of a global digital elevation model (DEM) is an important and challenging task primarily because of the difficulties and costs associated with securing a reliable and representative reference dataset. In this article, we report on the vertical accuracy assessment of the WorldDEM™, the latest global DEM using the synthetic aperture radar interferometry (InSAR) method, based on the German TanDEM-X mission data. For reference data we use vertical profiles along the centerline of 47 paved runways located in different areas around the world. Our accuracy statement is based on the analysis of discrepancies between the reference data and the corresponding vertical profiles extracted from the WorldDEM™ dataset. Since the runways are nearly flat and have homogenous surfaces, the observed discrepancies are mainly due to instrument-induced error. Therefore, the derived accuracy statement has a universal character, e.g., it is not biased by other error sources including target-or environment-induced errors. Our main conclusions are that the WorldDEM™ is the most accurate global DEM to date in terms of its vertical accuracy; it appears that the accuracy is spatially independent.

show abstract

“…Red dashed lines indicate the boundaries of the following figure panel. Janauacá lake basin delimited by Pinel et al ().…”

Section: Methodsmentioning

confidence: 99%

Carbon Dioxide Fluxes to the Atmosphere From Waters Within Flooded Forests in the Amazon Basin

et al. 2020

View full text Add to dashboard Cite

Inundated tropical forests are underrepresented in analyses of the global carbon cycle and constitute 80% of the surface area of aquatic environments in the lowland Amazon basin. Diel variations in CO2 concentrations and exchanges with the atmosphere were investigated from August 2014 to September 2016 in two flooded forests sites with different wind exposure within the central Amazon floodplain (3°23′S, 60°18′W). CO2 profiles and estimates of air–water gas exchange were combined with ancillary environmental measurements. Surface CO2 concentrations ranged from 19 to 329 μM, CO2 fluxes ranged from −0.8 to 55 mmol m−2 hr−1 and gas transfer velocities ranged from 0.2 to 17 cm hr−1. CO2 concentrations and fluxes were highest during the high water period. CO2 fluxes were three times higher at a site with more wind exposure (WE) compared to one with less exposure (WP). Emissions were higher at the WP site during the day, whereas they were higher at night at the WE site due to vertical mixing. CO2 concentrations and fluxes were lower at the W P site following an extended period of exceptionally low water. The CO2 flux from the water in the flooded forest was about half of the net primary production of the forest estimated from the literature. Mean daily fluxes measured in our study (182 ± 247 mmol m−2d−1) are higher than or similar to the few other measurements in waters within tropical and subtropical flooded forests and highlight the importance of flooded forests in carbon budgets.

show abstract

Correction of Interferometric and Vegetation Biases in the SRTMGL1 Spaceborne DEM with Hydrological Conditioning towards Improved Hydrodynamics Modeling in the Amazon Basin

Cited by 24 publications

References 59 publications

Amazonian floodplain water balance based on modelling and analyses of hydrologic and electrical conductivity data

Amazonian floodplain water balance based on modelling and analyses of hydrologic and electrical conductivity data

Evaluation of Vertical Accuracy of the WorldDEM™ Using the Runway Method

Carbon Dioxide Fluxes to the Atmosphere From Waters Within Flooded Forests in the Amazon Basin

Contact Info

Product

Resources

About