Convertible Thermal Meta-Structures via Hybrid Manufacturing of Stereolithography Apparatus 3D Printing and Surface Metallization for Thermal Flow Manipulation

Abstract

For manipulating heat flow according to human desire, thermal metamaterial structures (meta-structures) have attracted growing interest. Based on the transformation thermotics and the effective medium approximation theory, we designed and fabricated a convertible thermal meta-structural device to demonstrate that multiple different heat-flow manipulations could be conducted using a single thermal meta-structural device. The convertible meta-structures were designed by discretizing a two-dimensional plane and separating multiple square unit modules with stripe-shaped dissimilar materials of the Polydimethylsiloxane (PDMS) and solid resin with surface metallized copper (Cu). The convertible thermal meta-structure device with a relatively high geometric accuracy was fabricated via a proposed hybrid manufacturing path of “Stereolithography Apparatus (SLA) 3D printing—electroless plating—electroplating—thermally insulated packaging”. The thermal manipulation features were numerically simulated and preliminarily verified by experimental testing. Using multiple dispersed square unit modules to replace an annular region of the thermal meta-structure exhibited different thermal flow functions, including thermal cloak, thermal concentration, thermal rotation, and thermal dispersion, through the unique geometric design of the heat-flow transfer direction within each module. By rotating each square unit module at a specific angle and arranging the modules, similar to a “jigsaw puzzle”, the convertibility among different thermal manipulation functions was achieved. This path is anticipated to provide a new strategy for multifunctional meta-structures in thermo-physics and its potential engineering applications.

Management of peripheral nerve injuries using natural based biomaterials and their derivatives: Advances and prospective

“…This approach aims to address limitations and further optimize the regenerative potential of GelMA‐based constructs 108 . Its unique combination of tunable properties, biofunctionalization capabilities, and support for axonal outgrowth positions it at the forefront of biomaterials research in the realm of regenerative medicine 109 …”

3D and 4D Printing as Integrated Manufacturing Methods of Industry 4.0

“…In addition, the method is confined to epoxy or acrylic based resins, the majority of which shrink following polymerization. SLA printers can achieve greater resolution and a more complicated structure for photo cross-linkable materials (Li et al, 2022;Valencia et al, 2022;Karatza et al, 2022). Figure 2 depicts a schematic of the SLA 3D printing method.…”

Light-based 3D bioprinting technology applied to repair and regeneration of different tissues: A rational proposal for biomedical applications

“…Among the numerous components of light-based 3D bioprinting, photosensitive polymers are frequently the most noticeable and directly affect the characteristics of the final printed product. For researchers who want to customize the appropriate light-based 3D bioprinting materials for different repair sites, choosing the appropriate photosensitive polymers is the first and one of the most significant steps [ 21 ].…”