Container Flow-Transport Technology of Selection Grain Production

Abstract

Abstract. Low-level mechanization is one of the main reasons for the high costs in selection and primary seed production. Crop breeders use transport and loading facilities for seed material transporting in an unsystematic manner. (Research purpose) Development of technology of transport support in selection and seed production, including all transport and loading processes of the delivery of grain seeds from selection combines to storage facilities using containers for seed collection, transportation, drying, and storage. (Materials and methods) The authors have described a container flowtransport technology of selection grain harvesting at the stage of primary reproduction and developed a machine complex technology and a database of harvesting and transport machines for seed collection, transportation, drying, and storage. (Results and discussion) The authors have determined the type of transport and loading means for the container method of seed harvesting, transportation and storage recommended for use in selection and seed production. There are four distinctive novelty positions of the presented type: the ability to transport containers in 2 rows; increased loading height from 2 m to 3 m; maximum operating radius reaches 3.8 m (vs. 2.7 m); increased cargo capacity – by 460 kg. (Conclusions) The authors suggest using the developed methodology to improve the technological process of harvesting, transportation and postharvest processing of seed grain, organize this process, as well as select machine parameters and technical equipment on the farms of the Central region of Russia. It has been suggested that test prototypes of containers and a loader with a container tilter should be designed and manufactured for use in primary crop processing.

The results of the production tests of the method for diagnosing the eccentricity of the rotor of an asynchronous electric motor

“…A lot of work has been devoted to transients in asynchronous electric motors, but the start-up mode is still a little-studied process [12][13][14][15]. The most common mechanical malfunction of the engine is the eccentricity of the rotor caused by bearing wear [5][6][7][8][9][10][11], [20]. The eccentricity significantly deteriorates operational characteristics of the machine and causes its nonserviceable condition.…”