Contact mechanics of elastic-plastic fractal surfaces and static friction analysis of asperity scale

Abstract

Purpose The purpose of this paper is to provide a static friction coefficient prediction model of rough contact surfaces based on the contact mechanics analysis of elastic-plastic fractal surfaces. Design/methodology/approach In this paper, the continuous deformation stage of the multi-scale asperity is considered, i.e. asperities on joint surfaces go through three deformation stages in succession, the elastic deformation, the elastic-plastic deformation (the first elastic-plastic region and the second elastic-plastic region) and the plastic deformation, rather than the direct transition from the elastic deformation to the plastic deformation. In addition, the contact between rough metal surfaces should be the contact of three-dimensional topography, which corresponds to the fractal dimension D (2 < D < 3), not two-dimensional curves. So, in consideration of the elastic-plastic deformation mechanism of asperities and the three-dimensional topography, the contact mechanics of the elastic-plastic fractal surface is analyzed, and the static friction coefficient nonlinear prediction model of the surface is further established. Findings There is a boundary value between the normal load and the fractal dimension. In the range smaller than the boundary value, the normal load decreases with fractal dimension; in the range larger than the boundary value, the normal load increases with fractal dimension. Considering the elastic-plastic deformation of the asperity on the contact surface, the total normal contact load is larger than that of ignoring the elastic-plastic deformation of the asperity. There is a proper fractal dimension, which can make the static friction of the contact surface maximum; there is a negative correlation between the static friction coefficient and the fractal scale coefficient. Originality/value In the mechanical structure, the research and prediction of the static friction coefficient characteristics of the interface will lay a foundation for the understanding of the mechanism of friction and wear and the interaction relationship between contact surfaces from the micro asperity-scale level, which has an important engineering application value.

Fractal model of thermal contact conductance of rough surfaces based on elliptical asperity

“…The literature (Pan et al, 2021;Kogut and Etsion, 2002) show that elastic-plastic deformation is divided into two stages.…”

“…The literature (Pan et al , 2021; Kogut and Etsion, 2002) show that elastic–plastic deformation is divided into two stages. When δ c ≤ δ ≤ 6 δ c , the asperities are in the first elastic–plastic deformation stage.…”

Static friction coefficient model of joint surface based on the modified fractal model and experimental investigation

“…established a fractal model of joint surface friction by considering the three deformation mechanisms of asperity's complete elasticity, elasto-plasticity and complete plasticity, also the influence of different factors on contact state of bonding surface was explored. On the basis of traditional M-B model, Li [18][19] et al…”

“…When only elastic deformation is considered, the tangential force can be expressed as, ,eq (13)and eq (19) into the calculation to get, e 8 8(2 1) = ( 63 ) (6 3 )…”