Construction of anthropomorphic phantoms for use in dosimetry studies

Abstract

This paper reports on the methodology and materials used to construct anthropomorphic phantoms for use in dosimetry studies, improving on methods and materials previously described by Jones et al. [Med Phys. 2006;33(9):3274–82]. To date, the methodology described has been successfully used to create a series of three different adult phantoms at the University of Florida (UF). All phantoms were constructed in 5 mm transverse slices using materials designed to mimic human tissue at diagnostic photon energies: soft tissue‐equivalent substitute (STES), lung tissue‐equivalent substitute (LTES), and bone tissue‐equivalent substitute (BTES). While the formulation for BTES remains unchanged from the previous epoxy resin compound developed by Jones et al. [Med Phys. 2003;30(8):2072—81], both the STES and LTES were redesigned utilizing a urethane‐based compound which forms a pliable tissue‐equivalent material. These urethane‐based materials were chosen in part for improved phantom durability and easier accommodation of real‐time dosimeters. The production process has also been streamlined with the use of an automated machining system to create molds for the phantom slices from bitmap images based on the original segmented computed tomography (CT) datasets. Information regarding the new tissue‐equivalent materials, as well as images of the construction process and completed phantom, are included.PACS number: 87.53.Bn

Monte Carlo simulations of adult and pediatric computed tomography exams: Validation studies of organ doses with physical phantoms

“…20 Both phantoms are made with three types of materials developed at UF-soft tissueequivalent, lung tissue-equivalent, and bone tissue-equivalent substitutes. 17,21 Each material closely matches the reference densities and x-ray mass-energy absorption coefficients in the diagnostic photon energy range for their respective representative body tissues, as given in Report No. 46 of the International Commission on Radiation Units and Measurements (ICRU).…”

Suitability of low density materials for 3D printing of physical breast phantoms

“…Once the software models are created, they are routinely converted to stereolithography files and printed with 3D printers. Such an approach has been followed by Winslow et al (2009) for the production of three different adult anthropomorphic phantoms from original segmented CT patient datasets.…”

Radiation Biology Irradiator Dose Verification Survey

“…Bone equivalent material is an epoxy resin with silicon dioxide and calcium carbonate added. All materials have a composition to match the mass density, mass attenuation coefficients and mass energy absorption coefficients within the diagnostic energy range (33,34). The individual phantom slices are removed from the slab and each region is filled as appropriate.…”