Construction and characterization of nano-oval BaTi0.7Fe0.3O3@NiFe2O4 nanocomposites as an effective platform for the determination of H2O2

Abstract

Talented di-phase ferrite/ferroelectric BaTi0.7Fe0.3O3@NiFe2O4 (BFT@NFO) in oval nano-morphology was chemically synthesized using controlled sol–gel processes and calcined at 600 °C. The effects of shielding using NiFe2O4 (NFO) nanoparticles on the microstructure, phase transition, thermal, and relative permittivity of BaTi0.7Fe0.3O3 (BTF) nano-perovskite were systematically explored. X-ray diffraction patterns and Full-Prof software exhibited the forming of the BaTi2Fe4O11 hexagonal phase. TEM and SEM images demonstrated that the coating of BaTi0.7Fe0.3O3 has been successfully controlled with exquisite nano-oval NiFe2O4 shapes. The NFO shielding can significantly promote the thermal stability and the relative permittivity of BFT@NFO pero-magnetic nanocomposites and lowers the Curie temperature. Thermogravimetric and optical analysis were used to test the thermal stability and estimate the effective optical parameters. Magnetic studies showed a decrease in saturation magnetization of NiFe2O4 NPs compared to their bulk system, which is attributed to surface spin disorder. Herein, characterization and the sensitive electrochemical sensor were constructed for the evaluation of peroxide oxidation detection using the chemically adjusted nano-ovals barium titanate-iron@nickel ferrite nanocomposites. Finally, The BFT@NFO exhibited excellent electrochemical properties which can be ascribed to this compound possessing two electrochemical active components and/or the nano-ovals structure of the particles which can further improve the electrochemistry through the possible oxidation states and the synergistic effect. The result advocates that when the BTF is shielded with NFO nanoparticles the thermal, dielectric, and electrochemical properties of nano-oval BaTi0.7Fe0.3O3@NiFe2O4 nanocomposites can be synchronously developed. Thus, the production of ultrasensitive electrochemical nano-systems for the determination of hydrogen peroxide is of extensive significance.

Advancing energy storage and supercapacitor applications through the development of Li+-doped MgTiO3 perovskite nano-ceramics

“…Metal oxides are extensively employed in energy storage and conversion applications, mainly due to their cost-effectiveness, abundant availability, ease of preparation, multiple valence states, and environmental friendliness. They find applications in various fields, including sensors 23 – 26 , biosensors 27 , 28 , lithium batteries 29 , supercapacitors 30 – 32 , electrocatalysis, and fuel cells.…”

Adjusting the Effects of Cr3+ Doping on Structural, Dielectric, Antimicrobial Properties of Delafossite SrCuO2 Nanoparticle

“…The dielectric constant directly correlates with a capacitor's energy storage capability. [36][37][38] Meanwhile, the loss tangent measures the amount of energy dissipated as heat during the charging process. Figures 4-6 display the frequency-dependent characteristics of the dielectric constant, dielectric loss, and dielectric tangent loss for the SrCuO 2 co-doped with Cr nanoparticles.…”

Structural, dielectric, and electrochemical properties of pear-shaped CexLi2Zn0.5Mn0.5Ti3−xO8 supercapacitor: XRD and dielectric calculation

“…By electrochemical system, chemical and physical processes could be characterized and studied using cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) techniques (table 2). Thus, the stability, performance and charge transport properties of any suggested materials could be monitoring [35][36][37][38].…”