Considerations on the thrust-to-input ratio of a cylindrical moving-coil-type linear dc motor

Abstract

Linear dc motors (LDMs) are widely used for servo‐actuators, compressors, and so on. High‐efficiency LDMs are strongly desired for compressors. To realize LDMs with high‐efficiency characteristics, decreasing the copper losses, namely, thrust‐to‐input ratio, F/P, must be increased. This paper describes an optimization method for the F/P of a moving‐coil‐type LDM. The following results are obtained: Simplified expression for the F/P of the LDM is derived from the permeance analysis method. The effects of dimensions of the LDM on the F/P of the LDM are investigated through the simplified expression for the F/P. As a result, the optimum dimension of the LDM for maximizing the F/P exists. When the static thrust is 100 N, the measured F/P of the initial LDM is 7.9 N/W, and the errors using the simplified expression for the F/P and the finite element method (FEM) are 33 and 8%, respectively. Derived simplified expression for the F/P is useful because the F/P can be calculated easily. An improved LDM, which has 26% higher F/P than those of the initial LDM, is designed by using the permeance analysis method and the FEM. © 2000 Scripta Technica, Electr Eng Jpn, 131(1): 103–111, 2000