RESUMO -O objetivo do trabalho foi avaliar a regeneração dos meios filtrantes a duzentos ciclos de filtração e limpeza por pulso de ar reverso. Os ensaios de filtração foram realizados mantendo-se a velocidade de filtração constante a 4 cm/s, com queda de pressão máxima de 200 Pa e tempo de pulso de 200 ms, a cada limpeza do tecido. O material particulado utilizado foi o concentrado fosfático de diâmetro médio 9,63 µm e os filtros foram de acrílico e de polipropileno. Os parâmetros obtidos experimentalmente foram: queda de pressão residual, massa retida, fração removida, resistências específicas e porosidade da torta formada. Os resultados mostraram que apesar da massa retida e da queda de pressão residual serem maiores, as tortas de filtração apresentaram maior porosidade e, portanto menor resistência específica para os filtros avaliados.
INTRODUÇÃOOs impactos ambientais causados pela poluição do ar industrial começaram a surgir com o fortalecimento do setor industrial e, a partir disso, a questão ambiental baseada na conservação, solidificou-se em todo o mundo, afetando a ciência e a tecnologia, nas últimas décadas. Consequentemente, a filtração por pulso de ar reverso tornou-se a escolha preferida em todo o mundo, como uma das principais operações na limpeza de correntes gasosas (Mukhopadhyay e Choudhary, 2013).A operação de filtração por pulso de ar reverso é amplamente utilizada para controlar a emissão de partículas e para recuperar partículas no setor industrial, combinando o controle ambiental e o reaproveitamento de material particulado, sem perder a eficiência de coleta, em um processo contínuo de regeneração do meio filtrante, não apresentando a necessidade de interromper a filtração (Ginestet e Pugnet, 2012;Zhou et al., 2012).Durante a filtração, o fluido contendo o material particulado passa por meio de um coletor poroso e permeável e, neste meio filtrante, uma camada de pó é depositada em sua superfície, formando a torta de filtração e resultando em um aumento linear da queda de pressão no filtro (Simon et al., 2010). Nesta etapa, os filtros devem ser periodicamente regenerados por meio da fase de limpeza utilizando pulso de ar reverso, para prevenir o alto consumo de energia. Por isso, o Área temática: Engenharia Ambiental e Tecnologias Limpas 1