Conceptual Study of a Thermal Storage Module for Solar Power Plants with Parabolic Trough Concentrators

Abstract

The thermal storage technology (TSE) has a relevant strategic importance for the success of solar plants devoted to electric energy and heat production. The major benefits in the use of storage include higher efficiency and reduction in the mean levelled cost of the electric energy unit (LEC). Sensible heat storage systems within solid media have been identified, both technically and economically, as a very promising solution. The development of such a storage technology, adopting concrete, could reduce the specific cost to less than 20€ per kWh of thermal capacity; additionally, such a solution is suitable for small-medium size plants with a power ranging from 1 MW to 5 MW, to be easily introduced in the Italian territory and with reduced operational and maintenance needs. In large size CSP systems, as the ARCHIMEDE plant built by ENEL with ENEA technology, a high temperature fluid storage (between 400 and 500°C) is required. Such a temperature seems at present not adequate to allow for adopting concrete, whereas the production of concrete able to sustain 250-300°C appears as a reachable objective. It is supposed to study a storage system characterised by a parallelepiped structure with appropriate section, selfbearing and supported on its major axis, as well as by a piping system directing the thermovector fluid within the cemented matrix