COMSOL Simulation for Design of Induction Heating System in VULCAN Facility

Abstract

The experimental facility VULCAN was setup to study the fuel-coolant interaction (FCI) phenomena in a postulated severe accident of light water reactors. The heating system is important for the facility to prepare molten material in a crucible. This article is concerned with the design of the heating system, which applies electromagnetic induction heating method. The COMSOL code was employed to simulate the induction heating characteristics of a graphite crucible under different current and frequency of the work coil (inductor). Given a frequency, the relationship between the crucible’s average temperature and the inductor’s current is obtained, which is instrumental to select the power supply of the induction heating system. Meanwhile, the skin effect of induction heating is analyzed to guide the choice of frequency and inductor of the heating system. According to the simulation results, the induction heating system of frequency 47 kHz is suitable for the experiment, with a good agreement in temperature between the measured and the predicted.

Simulation and Implementation of an Induction Heating System for Heating Brittle Thin Metal Sheets by Various Excitation Current Frequencies

“…The proposed system is created for a 1 kW power level, and the processes of heat production are thoroughly explored. The design of the heating system, which employs the electromagnetic induction heating technology, is addressed in [9]. A graphite crucible's induction heating properties have been simulated using COMSOL code with various coil current and frequency conditions.…”