Computer and Physical Modeling for Verification of the Stereo System Calibration Parameters Optimization Results

Abstract

Close-range photogrammetry is widely used to measure surface shapes and diagnose deformation. Usually, a stereo system of video cameras is used to register images of the measured object from several different angles. The surface shape is determined by triangulating a set of 2D points from these images. Triangulation uses the stereo system calibration parameters, which are determined before the experiment. Measurements during conditions with increased vibration loads can lead to a change in the relative position of the cameras of the stereo system (decalibration). This leads to a change in the actual calibration parameters and an increase in the measurement error. The decalibration problem can be solved using multidimensional optimization algorithms. To verify their calculation's results it is proposed to use a computer and physical modeling of decalibration of a video camera stereo system in laboratory conditions. The paper presents the implementation of the optimizing algorithm for the external parameters of a stereo system and the results of its performance during the experimental investigations.