Compressive Property and Toughening Mechanism of Directionally Solidified Fe(Al, Ta)/Fe₂Ta (Al) Eutectic Composites

Abstract

In present study Fe(Al, Ta)/Fe2Ta(Al) eutectic composites were prepared using the electron beam floating zone melting directional solidification technique. The compression and fracture toughness properties of Fe(Al, Ta)/Fe2Ta(Al) eutectic composites at different solidification rates were studied with compression and three‐point bending experiments. The toughening mechanism of the material was also analyzed from morphology, composition and microstructure. The results show that the yield strength and compression properties of the Fe(Al, Ta)/Fe2Ta(Al) eutectic composite are increased with the increase of the solidification rate. The room temperature fracture toughness reaches 30.5 MPa·m1/2 when the solidification rate is 4 mm/min. In addition, the material exhibits high strength performance at room temperature. However, it exhibits poor strength and excellent plasticity due to the softening effect of recrystallization at 600°C. The toughening mechanism of the Fe(Al,Ta)/Fe2Ta(Al) eutectic composites can be summarized as crack blunting, crack branching, crack deflection, and local deformation.This article is protected by copyright. All rights reserved.