Compressed sampling strategies for tomography

Abstract

We investigate new sampling strategies for projection tomography, enabling one to employ fewer measurements than expected from classical sampling theory without significant loss of information. Inspired by compressed sensing, our approach is based on the understanding that many real objects are compressible in some known representation, implying that the number of degrees of freedom defining an object is often much smaller than the number of pixels/voxels. We propose a new approach based on quasi-random detector subsampling, whereas previous approaches only addressed subsampling with respect to source location (view angle). The performance of different sampling strategies is considered using object-independent figures of merit, and also based on reconstructions for specific objects, with synthetic and real data. The proposed approach can be implemented using a structured illumination of the interrogated object or the detector array by placing a coded aperture/mask at the source or detector side, respectively. Advantages of the proposed approach include (i) for structured illumination of the detector array, it leads to fewer detector pixels and allows one to integrate detectors for scattered radiation in the unused space; (ii) for structured illumination of the object, it leads to a reduced radiation dose for patients in medical scans; (iii) in the latter case, the blocking of rays reduces scattered radiation while keeping the same energy in the transmitted rays, resulting in a higher signal-to-noise ratio than that achieved by lowering exposure times or the energy of the source; (iv) compared to view-angle subsampling, it allows one to use fewer measurements for the same image quality, or leads to better image quality for the same number of measurements. The proposed approach can also be combined with view-angle subsampling.

How little data is enough? Phase-diagram analysis of sparsity-regularized X-ray computed tomography

“…The prominent role of the Gaussian sensing matrices and other random matrix constructions in CS gives the impression that random sensing is a key CS feature and it is tacitly assumed in the imaging community that random sensing provides superior recoverability performance to that of structured sampling. This assumption has even lead researchers to investigate hardware implementations of random sampling for CT [16]. However, more recently novel CS guarantees have appeared for certain non-random matrices [17], which may be a step toward reduced focus on random sampling, although these matrices are also quite far from CT.…”

Coded aperture optimization for compressive X-ray tomosynthesis

“…Recently, in [7], Kaganovsky et al introduced coded aperture projections for medical CT scanner geometries. Random coded apertures are used to modulate the measurements obtained by varying the angle and detector use for each projection [7].…”

System Design for Joint Attenuation and Scatter Imaging for Baggage Inspection

“…Our design of the attenuation system uses system design principles recently described by Kaganovsky, et al [1]. The detectors are assumed to be distributed along a tunnel, with multiple sources placed along the tunnel.…”