Abstract:This paper aims to discover the general steady-state operation characteristics, as well as improving the dynamic performance, of the modular multilevel converter (MMC)-based unified power flow controller (UPFC). To achieve this, first, we established a detailed power flow model for MMC-based UPFC containing each critical part and made qualitative and graphical analyses combining 2-dimensional operation planes and 3-dimensional spatial curve surfaces comprehensively to derive general power flow principles and o… Show more
“…However, even when thyristor-based FACTS are reliable, they have significant disadvantages, such as low power factor, limited regulation capability, limited redundancy, high harmonic distortion, restricted operation in cases of faults and high output ripple. Due to these disadvantages, the development of FACT devices based on MMCCs has gained attention as a proper and feasible alternative in the industrial market [115][116][117].…”
The modular multilevel matrix converter is a relatively new power converter topology suitable for high-power alternating current (AC)-to-AC applications. Several publications in the literature have highlighted the converter capabilities, such as full modularity, fault-redundancy, control flexibility and input/output power quality. However, the topology and control of this converter are relatively complex to realise, considering that the converter has a large number of power-cells and floating capacitors. To the best of the authors’ knowledge, there are no review papers where the applications of the modular multilevel matrix converter are discussed. Hence, this paper aims to provide a comprehensive review of the state-of-the-art of the modular multilevel matrix converter, focusing on implementation issues and applications. Guidelines to dimensioning the key components of this converter are described and compared to other modular multilevel topologies, highlighting the versatility and controllability of the converter in high-power applications. Additionally, the most popular applications for the modular multilevel matrix converter, such as wind turbines, grid connection and motor drives, are discussed based on analyses of simulation and experimental results. Finally, future trends and new opportunities for the use of the modular multilevel matrix converter in high-power AC-to-AC applications are identified.
“…However, even when thyristor-based FACTS are reliable, they have significant disadvantages, such as low power factor, limited regulation capability, limited redundancy, high harmonic distortion, restricted operation in cases of faults and high output ripple. Due to these disadvantages, the development of FACT devices based on MMCCs has gained attention as a proper and feasible alternative in the industrial market [115][116][117].…”
The modular multilevel matrix converter is a relatively new power converter topology suitable for high-power alternating current (AC)-to-AC applications. Several publications in the literature have highlighted the converter capabilities, such as full modularity, fault-redundancy, control flexibility and input/output power quality. However, the topology and control of this converter are relatively complex to realise, considering that the converter has a large number of power-cells and floating capacitors. To the best of the authors’ knowledge, there are no review papers where the applications of the modular multilevel matrix converter are discussed. Hence, this paper aims to provide a comprehensive review of the state-of-the-art of the modular multilevel matrix converter, focusing on implementation issues and applications. Guidelines to dimensioning the key components of this converter are described and compared to other modular multilevel topologies, highlighting the versatility and controllability of the converter in high-power applications. Additionally, the most popular applications for the modular multilevel matrix converter, such as wind turbines, grid connection and motor drives, are discussed based on analyses of simulation and experimental results. Finally, future trends and new opportunities for the use of the modular multilevel matrix converter in high-power AC-to-AC applications are identified.
“…Based on the original power flow model of the UPFC embedded power system at different SCPs in Appendix A of [22], the PFG to each CIV at different SCP are derived out. Each equation is comprised of two parts containing the active power flow gradients (APFG) and reactive power flow gradients (RPFG) to each CIV, and all the equations are listed as below.…”
Section: Mathematical Model For All the Pfg To Civsmentioning
The power flows in the unified power flow controller (UPFC) embedded system is mainly regulated by the two variables containing the magnitude and the phase angle of the output series inserted voltage (OSIV) of UPFC. Different value combinations of the two variables can form multiple regulation modes of OSIV, and the regulation principles and efficiencies for power flows are distinct by different regulation modes. This paper dedicates to research the regulation principles of active and reactive power flow gradients (PFG) to multiple characteristic independent variables (CIVs) at several selected critical points (SCP) of the system in different operation conditions. The CIVs contains the magnitude of OSIV, the phase angle of OSIV, and the phase difference of the system. First, multiple power flow regulation modes of OSIV are designed, the mathematical models of the PFG to each CIV at each SCP are established, and the theoretical principles for the PFG to each CIV at each SCP are analyzed and compared. Next, four typical operation conditions of the system and four regulation scenarios are assumed and case studies for the PFG to each CIV at different SCP are carried out. The test results at each SCP are analyzed both in the two-dimensional planes and three-dimensional spaces. The regulation principles and efficiencies of PFG to each CIV at different SCP are compared with each other and summarized, which can offer useful references for practical engineering and applications of UPFC.
“…Regarding modulation and control techniques for multilevel converters, one-cycle-control method [5], PWM strategies [12], selected harmonic elimination [13], predictive control [14], and others [15] have become the most studied strategies in the last years for several applications such as photovoltaic applications [16], wind energy conversion systems [17], active power filters [18], motor drives [19], and others [20]. This work will discuss the application of the sinusoidal pulse width modulation (SPWM) technique with AFBMI.…”
This paper introduces an approach that applies a digital sampling technique for a sinusoidal pulse width modulation (SPWM) multilevel inverter modulation that reduces the total harmonic contents in the output voltage compared to that of classical regular sampling techniques. This new modulation emulates with a high degree of fidelity a natural sampling pulse width modulation (PWM). The theoretical analysis of this new digital technique compared with natural sampling has been validated by simulations and through experiments with a built prototype that performed five–level inverter modulations with vertically displaced carriers in phase disposition. Both simulation and experimental results generate a SPWM output voltage with higher fidelity than classic regular sampling techniques, allowing a reduction of the filtering demands on the inverter output, which in turn can decrease the converter size and its manufacturing costs. As the presented technique is digital, the resulting modulation is more robust against switching noise, jitter, and other system perturbations and the modulation parameters can be changed easily, even in an automated way. For this reason, the modulation introduced here can be a useful tool to perform spectral analysis for different multilevel modulations and systems.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.