Comprehensive assessment of line-/point-focus combined scheme for concentrating solar power system

Abstract

Summary The line‐/point‐focus combined scheme for concentrating solar power (CSP) system is proposed. For solar field, the parabolic trough (PT) or linear Fresnel (LF) is used as the line‐focus preheating and evaporation stages while the solar tower is used as the point‐focus superheating and reheating stages. The combined schemes benefit from the high concentration ratio of point‐focus technology and low cost of line‐focus technology. Particularly, the combined scheme guarantees the concentrated solar thermal energy matching the temperature requirement of steam generation process with less exergy loss. Performance and economic assessments have been performed for 50 MWe CSP system with two of the combined schemes, ie, PT (synthetic oil, SO) + Tower (molten salt, MS) and LF (direct steam generation, DSG) + Tower (DSG), as well as existing single schemes being the references, ie, PT (SO), LF (DSG), Tower (MS), and Tower (DSG). The comparative results show that the combined schemes are superior to liner‐focus schemes in efficiency and to point‐focus schemes in capital cost and scalability. Specifically, the PT (SO) + Tower (MS) system suggests the favorable potential in practical application with the highest annual net solar‐to‐electrical energy conversion efficiency of 16.07% and the reasonable levelized cost of electricity (LCOE) of 16.121 US cent/(kW·h). This work provides an alternative guidance for future development of the CSP technology.

A comprehensive thermodynamic analysis of load‐flexible CHP plants using district heating network

“…A thermodynamic model of conventional coal-fired power plants has already been well developed in the previous researches. 3,[39][40][41] In this study, the relationship between the generated power and steam extraction in different loads of the boiler is required to quantify. For the specific CHP plant, the generated electric power at the time of t (P, MW) can be described as…”

Performance evaluation and comparison of multistage indirect evaporative cooling systems in two operation modes

“…Caliskan et al studied three types of M‐cycle IEC by using exergy analysis. The combined cooling system was considered as a potential approach for improving the energy efficiency . Boukhanouf et al introduced an IEC design by integrating heat pipes and porous ceramic tubes.…”

Performance investigation of solar tower system using cascade supercritical carbon dioxide Brayton-steam Rankine cycle

“…Nowadays, the CSP systems can be classified into four main technic routines, namely solar tower power (STP) system, parabolic trough system, linear Fresnel system, dish system [2]. Among them, the STP system is point focusing technology, which has a higher solar concentration ratio and is easier to reach a higher heat collection temperature and higher efficiency [3]. However, it is not economically competitive when compared with the traditional fossil-fired power plants at the current stage [4].…”