Comparison of Vinyl Acetate ‐ Butyl Acrylate Emulsion Copolymerizations Conducted in a Continuous Pulsed Sieve Plate Column Reactor and in a Batch Stirred Tank Reactor

Abstract

Summary: In this work, vinyl acetate/butyl acrylate emulsion copolymerizations carried out in a continuous tubular reactor (pulsed sieve plate column, PSPC) were compared to those conducted in a semibatch stirred tank reactor under similar operational conditions. In order to minimize the compositional drift along the PSPC, reactions were carried out with different numbers (2, 3 and 4) of lateral feed streams of the more reactive monomer (butyl acrylate). For comparison, fed batch reactions were conducted with the same number of intermittent shot additions of butyl acrylate, at the corresponding batch times. Both systems (tubular and semibatch) with distributed feeding of more reactive monomer are able to reduce composition drift thus providing more uniformity in copolymer composition. In addition, the tubular reactor presents much better control of temperature than the tank reactor, which is important to achieve higher productivity.

Liquid–liquid dispersion in a continuous oscillatory baffled reactor – Application to suspension polymerization

“…They are implied within http://dx.doi.org/10.1016/j.cej.2014.08.014 different processes including liquid-liquid extraction [1], crystallization [2][3][4] or polymerization to control final particle or latex properties [5,6]. For such separation techniques or reactions, it is crucial to control accurately the dispersion because it is directly related to efficiency of processes.…”

In‐Line Monitoring of Particle Size during Emulsion Polymerization under Different Operational Conditions using NIR Spectroscopy

“…Both reactors are fully automated with a computer controlled system for both temperature (jacket with mixture of hot and cold water) and feeding streams (metering pumps and balances). Further details of these experimental units have been described in previous works 24, 33…”

Kinetic and microstructural study of the continuous emulsion polymerization of an all-acrylics formulation in the loop reactor

“…However, only low solids content recipes and high Tg polymers have been produced in this type of reactors. Pulsed flow columns [6] and pulsed packed colums [7,8] provided better mixing in the reactor by the action of the externally induced pulses, although fouling may be a serious drawback in these reactors. Tubular reactors with superimposed secondary flows due to special geometries, such as the Wicker reactor [9,10] and the Taylor reactor [11,12] have also been proposed.…”