Comparison of 4,4′-Dimethylbiphenyl from Biomass-Derived Furfural and Oil-Based Resource: Technoeconomic Analysis and Life-Cycle Assessment

Abstract

Replacing oil-based toluene with biomass-derived furfural for 4,4′dimethylbiphenyl (DMBP) production can pave the way for sustainable polyester manufacture. This work compared the economic and environmental performances of two conceptual designs of 4,4′-DMBP production. The first toluene-based route consists of toluene alkylation to (methylcyclohexyl)toluene (MCHT), MCHT dehydrogenation to DMBP, and isomerization of lower-valued 3,3′-DMBP. The renewable furfural-based route includes hydrogenation of furfural to 2-methylfuran (MF), oxidative coupling of MF to 5,5′-dimethylfuran (DMBF), and tandem Diels−Alder dehydration of 5,5′-DMBF to 4,4′-DMBP. The reaction conditions are optimized to achieve a more economically feasible process using furfural feedstock. At a scale of 83 kmol/h feedstock, the 4,4′-DMBP minimum selling price of the furfural-based route is $3044/t, while that of the toluene-based route is $2488/t. The feedstock and 3,4′-DMBP isomer prices are identified as critical parameters for the economic evaluation by sensitivity analysis. A "cradle-to-gate" life-cycle assessment confirms that furfural-based DMBP production emits significantly fewer greenhouse gas (5.00 kg CO 2 equiv/kg DMBP) as compared to the toluene-based counterpart (8.28 kg CO 2 equiv/kg DMBP).

Design and operation of modular biorefinery supply chain under uncertainty using generalized Benders decomposition

“…74 This carbon sequestration effect is a primary benefit of using biomass feedstock, which is estimated by the carbon content of feedstocks through mass balance. 75,76 F I G U R E 7 Upper and lower bounds of the GBD algorithm for the first prediction horizon.…”

Multifeedstock and Multiproduct Process Design Using Neural Network Surrogate Flexibility Constraints

“…Moreover, HMF and furfural could further go through hydro-deoxygenation, acylation, and cyclo-addition processes to synthesize a variety of value-added products, including butadiene, jet fuel, surfactant, lubricant, and p -xylene. , It is noteworthy that this superstructure does not contain all potential biomass conversion routes. Many other HMF and furfural conversion technologies could be considered in this framework when the necessary input-output relationship, cost, and emission data are compiled. − …”

Synthesis of renewable C–C cyclic oxygenated compounds dedicated for high-density biofuels from biomass-derived cyclopentanone

“…14,15 Therefore, it is highly desirable to extend the carbon chain of biomassderived platform molecules to synthesize bio-fuels with similar properties to conventional gasoline and diesel. 16,17 Many strategies, such as aldol condensation, 18,19 Diels-Alder reaction, 20,21 Knoevenagel condensation 22,23 and hydroxyalkylation/alkylation 24,25 have been developed for elongating the carbon chain of bio-based platform molecules. In particular, aldol condensation is the most frequently used approach for the synthesis of high-quality fuels from bio-based molecules because aldol condensation is facilitated by acidic or basic sites under relatively mild conditions.…”