Comparative spatio-spectral heterogeneity analysis using multispectral and hyperspectral airborne images

Abstract

Knowledge of spatio-spectral heterogeneity within multisensor remote sensing images across visible, near-infrared and short wave infrared spectra is important. Till now, little comparative research on spatio-spectral heterogeneity has been conducted on real multisensor images, especially on both multispectral and hyperspectral airborne images. In this study, four airborne images, Airborne Thematic Mapper, Compact Airborne Spectrographic Imager, Specim AISA Eagle and AISI Hawk hyperspectral airborne images of woodland and heath landscapes at Harwood, UK, were applied to quantify and evaluate the differences in spatial heterogeneity through semivariogram modelling. Results revealed that spatial heterogeneity of multisensor airborne images has a close relationship with spatial and spectral resolution and wavelength. Within the visible, near-infrared spectra and short wave infrared spectra, greater spatial heterogeneity is generally observed from the relatively longer wavelength in short wave infrared spectra. There are dramatic changes across the red and red edge spectra, and the peak value is generally examined in the red middle or red edge wavelength across the visible and near-infrared spectra for vegetation or non-vegetation landscape respectively. In all, for real multisensor airborne images, the change in spatial heterogeneity with spatial resolution will accord with the change of support theory depending on whether dramatic change exists across the corresponding wavelength. Besides, if with close spatial resolution, the spatial heterogeneity of multispectral images might be far from the overall integration of these bands from the hyperspectral images involved. A comparative assessment of spatio-spectral heterogeneity using real hyperspectral and multispectral airborne images provides practical guidance for designing the placement and width of a spectral band for different applications and also makes a contribution to the understanding of how to reconcile spatial patterns generated by multisensors.

Improving hyperspectral sub-pixel target detection in multiple target signatures using a revised replacement signal model

“…Airborne or spaceborne hyperspectral imaging sensors provide remote sensing image cubes from the reflected solar radiation from the Earth's surface (Bingwen et al, 2013;Borengasser et al, 2007;Zhang & Du, 2012). A hyperspectral image cube contains very narrow bands covering from the visible spectrum through the infrared spectrum (Bakhshi et al, 2019).…”

Spatial and spectral pattern identification for the automatic selection of high-quality MODIS images

“…20 However, different studies 21,22 demonstrated that the results of the RS's derived analyses could be spectral dependent and, consequently, the selection of the band to be used in the method should be studied in depth, particularly due to the influence of the data spatial pattern on the analyses. 23 Likewise, the use of some combination of bands (e.g., orthogonal transformations, tasseled cap, panchromatic fusion, etc.) in different RS applications can achieve higher quality results than just using pure original bands.…”