Coatings for High Temperature Use

Abstract

Oxidation resistant nickel-aluminide coatings are designed to develop a protective alumina scale during high temperature exposure. It is well established that platinum additions, typically about 6-8 at%, provide substantial improvements in oxidation resistance of such coatings, yet the nature of the platinum effect is still not fully understood. In this work, the oxidation behavior of two commercial NiAl and NiPtAl coatings deposited on the same Ni-base single crystal alloy CMSX-4 was analyzed. Cyclic and isothermal oxidation tests were conducted at 1150 o C in air. Microstructure development and alumina/coating interface chemistry were studied as a function of oxidation time. Numerous voids developed at the Al 2 O 3 /NiAl interface, and sulfur was found to segregate at the void surfaces and at the contact interface, leading to spallation of the scale over the convex areas along ridges on the coating surface. The presence of platinum prevented sulfur segregation and void formation at the Al 2 O 3 /NiPtAl interface. As a result, the Al 2 O 3 scale on the NiPtAl coating remained adherent and virtually no spallation was observed even after prolonged cyclic oxidation.

A comprehensive study of dielectric, modulus, impedance, and conductivity of SrCeO3 synthesized by the combustion method

“…[1][2][3][4][5][6][7][8] Various applications including photovoltaic cells, light-emitting diodes, fuel cells, humidity and gas sensors, photocataly-sis, memory devices, etc., have been studied for perovskite oxides. [9][10][11] Compound SrCeO 3 belongs to the perovskite family. Due to its interesting electrical characteristics, it has been widely studied as a proton conductor.…”

“…These oxides have a wide spectrum of properties such as optoelectronics, dielectrics, ferroelectrics, thermoelectricity, superconductivity, piezoelectricity, resistive switching, and catalysis 1–8 . Various applications including photovoltaic cells, light‐emitting diodes, fuel cells, humidity and gas sensors, photocatalysis, memory devices, etc., have been studied for perovskite oxides 9–11 …”