Co-Design Block PA (Power Amplifier)-Antenna for 5G Application at 28 GHz Frequency Band

Abstract

This subject addresses the issue related to Transmitters for the new communication standard, namely 5G. Indeed to respond to the problems of radio coverage, the speed of services as well as the rise in user demand, transmitters must have ideal characteristics to be able to meet these requirements. This chapter proposes in order to answer such a problem a block made up of a linear array of antennas has 4 elements and a transistor amplifier operating at the 28 GHz frequency band. The Design of the Block is done first by the design of the antenna then the design of the amplifier and finally the junction of the two devices with a matching network to therefore form the block of transmitters Speaking of the design of the antenna, the prepared antenna is a patch antenna with a patch shape excluding the classic shapes which is printed on a Rogers-Duriod 5880 substrate so the thickness is 0.127 mm, the linear antenna array proposed has a gain greater than 15 dB and a Good Bandwidth, the transistor amplifier is in turn printed on the same substrate has the same thickness to minimize the losses during the junction of this one with the antenna, this amplifier offers a higher gain than device 15 dB and therefore the Bandwidth is greater than 2 GHz, each transmitter has an input and output reflection coefficient of less than −10 db. The simulation of each transmitter is made with the CST-microwave software for the Antenna and the ADS (Advanced Design System) software for the amplifier and the Block PA-Antenna. It is important to note that the Block output impedance is 50 ohms making our device more practical and easily commercial.