Circularly Polarized Array Antenna Using the Sequential Rotation Network Feeding for X-Band Communication

Abstract

This paper presents a novel Circularly Polarized (CP) microstrip array antenna with circular shape and slotted by an elliptical ring for X-band communication. This array antenna consists of 4 paths. Each patch is designed with a unique model, and the purposed antenna is mainly circular-shaped. An elliptical ring slot is set at the center of the circular-shaped patch. And a pair of triangle shapes employed as truncation factor is placed at the edge of the circular-shaped antenna. This microstrip array antenna is developed by 2 × 2 patches in a sequential rotation mode with relative phases 0 • , 90 • , 180 • , and 270 • . The total dimension of this array antenna is 60.92 mm × 60.92 mm. The simulated result shows a good agreement with minimum requirement. The center frequency of the antenna design is 8.2 GHz with low frequency at 8 GHz and high frequency at 8.4 GHz. The proposed antenna is produced under −10 dB S 11 of 21.9%, maximum gain of 12.47 dBic at the center frequency, and axial ratio bandwidth of 12.2% is obtained. Simulated result has been validated by fabrication and measurement, then the structure of the antenna design is fabricated on NPC-H22A with a thickness of 1.6 mm and dielectric constant of 2.17. Complete investigation and experimentation are presented in the next sections.

Challenges of the SAR-Enabled Microsatellite Concept INFANTE

“…The deployed size of the antenna is 3.6 m diameter in both cases, and the peak power 1.5 kW for a deployable mesh parabolic reflector. More recently, another study was published regarding the X-band option [16] centered at 8.2 GHz, for an operating altitude of 550-800 km, with a microstrip antenna array of circular shape.…”