Chemical‐surface modification of polymers using atmospheric pressure nonequilibrium plasmas and comparisons with vacuum plasmas

Abstract

We demonstrate that stable microwave‐coupled atmospheric pressure nonequilibrium plasmas (APNEPs) can be formed under a wide variety of gas and flow‐rate conditions. Furthermore, these plasmas can be effectively used to remove surface contamination and chemically modify polymer surfaces. These chemical changes, generally oxidation and crosslinking, enhance the surface properties of the materials such as surface energy. Comparisons between vacuum plasma and atmospheric plasma treatment strongly indicate that much of the vacuum‐plasma literature is pertinent to APNEP, thereby providing assistance with understanding the nature of APNEP‐induced reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 95–109, 2002

Diffuse Coplanar Surface Barrier Discharge and its applications for in-line processing of low-added-value materials

“…The reader is referred to a technical review [17] of the ambient air plasma jets based on arc and glidarc discharges. Ambient air plasma jets can be fed also, for example, by microwave discharges [19] and APGDs [16]. However, such plasma sources generate flowing relatively cold uniform air plasmas with the energy density up to some 10 W/cm 3 only.…”

Surface physical–morphological and chemical changes leading to performance enhancement of atmospheric pressure plasma treated polyester fabrics for inkjet printing

“…Wakida et al treated wool and polyethylene terephthalate (PET) fabrics with low-temperature plasma of helium/argon under atmospheric pressure to improve the samples wettability [4]. Shenton et al made comparisons of treating effect between atmospheric plasma and vacuum [5]. McCord et al modified nylon and polypropylene fabrics with atmospheric pressure plasmas [6].…”

Formation of multi‐layered inorganic film on polycarbonate surface modified by an atmospheric plasma discharge

“…Capital cost savings for both equipment and footprint, and relative ease of integration are further benefits in comparison with low pressure plasma technology approaches. [4] Under appropriate conditions, atmospheric plasma can be applied to the material at relatively low temperatures while preserving the integrity of polymer-based instruments. Among the various atmospheric pressure plasma processing techniques, dielectric barrier discharge (DBD) has certain advantages such as its ability to work well at atmospheric pressure, without vacuum restrictions; its simple and flexible configurations with respect to the geometrical shape of electrodes and the gap; and its ability to treat surfaces of various sizes and shapes.…”