Chemical, mineralogical and morphological changes in weathered coal fly ash: A case study of a brine impacted wet ash dump

Abstract

The mobility of species in coal fly ash (FA), co-disposed with brine using a wet ash handling system, from a coal fired power generating utility has been investigated. The study was conducted in order to establish if the wet ash dump could act as a salt sink. The ash was dumped as a slurry with 5:1 brine/ash ratio and the dam was in operation for 20 years. Weathered FA samples were collected along three cores at a South African power station's wet ash dump by drilling and sampling the ash at 1.5 m depth intervals. A fresh FA sample was collected from the hoppers in the ash collection system at the power station. Characterization of both fresh FA and weathered FA obtained from the drilled cores S1, S2 and S3 was done using X-ray diffraction (XRD) for mineralogy, X-ray fluorescence (XRF) for chemical composition and scanning electron microscopy (SEM) for morphology. Analysis of extracted pore water and moisture content determination of the fresh FA and the weathered FA obtained from the drilled cores S1, S2 and S3 was done in order to evaluate the physico-chemical properties of the FA. The XRD analysis revealed changes in mineralogy along cores S1, S2 and S3 in comparison with the fresh FA. The SEM analysis revealed spherical particles with smooth outer surfaces for the fresh FA while the weathered ash samples obtained from cores S1, S2 and S3 consisted of agglomerated, irregular particles appearing to be encrusted, etched and corroded showing that weathering and leaching had occurred in the ash dump. The moisture content (MC) analysis carried out on the fresh FA (1.8%) and the weathered FA obtained from the drilled cores S1 (41.4-73.2%), S2 (30.3-94%) and S3 (21.7-76.2%)indicated that the ash dump was water logged hence creating favourable conditions for leaching of species. The fresh fly ash (n = 3) had a pH of 12.38 ± 0.15, EC value of 4.98 ± 0.03 mS/cm and TDS value of 2.68 ± 0.03 g/L, the pH of the drilled core S1 (n = 45) was 10.04 ± 0.50, the EC value was 1.08 ± 0.14 mS/cm and the TDS value was 0.64 ± 0.08 g/L. Core S2 (n = 105) had pH of 10.04 ± 0.23; EC was 1.08 ± 0.06 mS/cm and TDS was 0.64 ± 0.04 g/L, while core S3 (n = 66) had pH of 11.04 ± 0.09; EC was 0.99 ± 0.03 mS/cm and TDS was 0.57 ± 0.01 g/L. The changes in pH values can be attributed to the dissolution and flushing out of alkaline oxides like CaO and MgO from the dumped ash. The variations in pH values shows that the fly ash is acidifying over time and metal mobility can be expected under these conditions. The large decrease of EC in the drilled ash cores S1, S2 and S3 compared to the fresh ash indicated a major loss of ionic species over time in the ash dump. The XRF analysis showed the progressive dissolution of the major aluminosilicate ash matrix which influenced the release of minor and trace elements into the pore water enhancing their mobility as the ash dam acidified over time. Brine co-disposal on the ash may have been responsible for the slight enrichment of some species such as Na (0.27-0.56%), SO4(2-) (0.06-0.08%), Mg (0.57-0.96 %) a...

Corrosion of reinforcement in concrete containing wet-stored fly ash

“…One approach involves mixing fly ash with water at around 10 to 20% by mass (sometimes referred to as conditioning) and stockpiling. Studies suggest that, depending on the properties of the material, site conditions and period of storage, effects occurring can range from minor changes in fly ash, to dissolution of certain components/product formation at particle surfaces [12][13][14]. It has been noted [2,15] during compaction of fly ash that (following water addition), cohesive forces initially develop in the material, with sulfate-based products subsequently forming and with time, and in the presence of free lime, pozzolanic reactions occur.…”

Dry-processing of long-term wet-stored fly ash for use as an addition in concrete

“…moisture level) and holding period [10], with reactivity potential affected [9,11]. Wet storage effects at actual fly ash sites (various exposure conditions/periods) have been noted to range from little change in the material [12,13], to processes including dissolution of components at particle surfaces/formation of secondary phases [13][14][15]. Hence, evaluation of individual storage areas is likely to be a necessary part of fly ash recovery.…”

Treatment of Acid Mine Drainage with Coal Fly Ash: Exploring the Solution Chemistry and Product Water Quality

“…The South African coal is sub-bituminous and generates coal fly ash that has low Fe content and the aqueous extracts of this coal fly ash are strongly alkaline (pH 12-12.5) due to the free lime content [16,[21][22][23][24]. The highly soluble CaO occurring as sub-micron fragments on the fly ash particles accounts for the alkaline properties of the coal fly ash [3].…”