La resistencia al ataque químico de vidriados cerámicos susceptibles al mismo, concretamente formulados a partir de una frita mate de calcio, se ha mejorado depositando en la superficie una capa delgada de óxido de circonio. Un sol de circonio estabilizado es el precursor de la capa, el cual se deposita mediante aerografía sobre el vidriado cocido y con un tratamiento térmico suave (T max ≈ 400 ºC), es transformado en ZrO 2 y anclado a la superficie. Los ensayos de resistencia química demuestran que el vidriado protegido no sufre un ataque apreciable visualmente por parte del ácido clorhídrico concentrado, condiciones en las que el mismo vidriado sin el recubrimiento resulta gravemente dañado. El precursor utilizado genera una capa de óxido de circonio que protege el vidriado subyacente, de modo que el ataque químico por parte del ácido clorhídrico queda confinado al entorno de las grietas y discontinuidades de la capa depositada.
Palabras clave: vidriados, ataque ácido, protección, óxido de circonio
ZrO 2 thin films to improve the chemical resistance of calcium matt glazesThe chemical resistance of ceramic glazes susceptible to it, and more specifically the glazes formulated with a calcium matt frit, is enhanced by depositing on the surface a thin layer of zirconium oxide. A stabilized zirconia sol is the precursor of the layer, which is deposited by spray painting over the glaze, and with a mild heat treatment (T max ≈ 400 ° C) is transformed into ZrO 2 and anchored to the glaze's surface. Chemical resistance tests show that the protected glaze does not suffer a visually significant attack by concentrated hydrochloric acid, conditions under which the same glaze without the coating is severely damaged. The used precursor generates a zirconium oxide layer that protects the underlying glaze, so that the chemical attack by the hydrochloric acid is confined to cracks and discontinuities in the deposited layer Keywords: glazes, acid attack, protection, zirconium oxide Boletín de la sociedad española de Cerámica y Vidrio Vol 51, 3, 169-174, Mayo-Junio 2012 issN 0366-3175. eissN 2173-0431. doi: 10.3989/cyv.252012
INTRODUCCIÓNLa deposición de recubrimientos de óxidos cerámicos sobre metales para evitar o reducir considerablemente la corrosión es una aplicación industrial muy importante y que genera un volumen de negocio muy amplio (1-3). Entre los materiales utilizados se halla el óxido de circonio, uno de los materiales cerámicos más refractarios y más resistentes a los agentes químicos agresivos. Los recubrimientos de ZrO 2 se utilizan preferentemente como barrera anti-corrosión en metales y aleaciones (4-7).Las aplicaciones de los recubrimientos de óxidos también han recibido atención por parte del sector de baldosas cerámicas en los últimos años, siendo uno de los aspectos más investigados la obtención de recubrimientos de TiO 2 con actividad fotocatalítica (8,9). Sin embargo, la mejora de la resistencia química de los vidriados no ha recibido la misma atención.Los vidriados de las baldosas cerámicas deben ser est...