Characterizations of Flexible Wearable Antenna based on Rubber Substrate

Abstract

Abstract-Modern ages have observed excessive attention from both scientific and academic communities in the field of flexible electronic based systems. Most progressive flexible electronic systems require incorporating the flexible rubber substrate antenna operating in explicit bands to offer wireless connectivity which is extremely required by today's network concerned society. This paper characterizes flexible antenna performance under the environments developed by natural rubber as the substrate. Flexible antenna grounded on rubber substrate was simulated using CST microwave studio with diverse permittivity and loss tangent. In our work, prototype antennas were built using natural rubber with different carbon filler substances. This paper reveals advanced flexible substrate effects on antenna quality factor (Q) and its consequences on bandwidth and gain. Such antennas under bending washing environment were also found to perform better than existing designs, showing less change in their gain, frequency shift and impedance mismatch.

Bending Analysis of Polymer-Based Flexible Antennas for Wearable, General IoT Applications: A Review

“…One of the impacts of bending on an antenna's performance is the reflection or scattering of waves and resultant impedance mismatch. While an impedance miss-match should occur when a flexible antenna is bent and crumpled, this simultaneously leads to a change in signal strength which often decreases [223], although sometimes increases, after bending the antenna. In order to analyse the effects of bending on impedance mismatch or reflection coefficient (S 11 ), the average of S 11 is evaluated from a flat case to a bend level up to 6mm for different ranges of frequencies.…”

Design Issues of Flexible Antenna -A Review

“…Saadat Hanif Dar et al [20] proposed a patch antenna using rubber substrate. The design performance of the antenna on human body was also investigated.…”

A fully flexible, high gain saw-tooth-shaped boundary fractal wearable patch antenna for WBAN applications

“…Designing such an effective and compact wearable antenna is challenging due to the low-size antenna structure, which offers a small current path and impedance mismatch at lower frequencies. Keeping the main characteristics in mind, many investigators chose the microstrip patch antenna in combination with fractal technology to produce the desired characteristics such as flexibility [7], compact [8], multi-band, and broadband characteristics [9][10][11][12][13][14].…”