Characterization of Vadose Zone Sediment: Borehole 299-W23-19 [SX-115] in the S-SX Waste Management Area

Abstract

Executive SummaryThis report was revised in September 2008 to remove acid-extractable sodium data from Tables 4.15 and 4.19. The sodium data was removed due to potential contamination introduced during the acid extraction process. The rest of the text remains unchanged from the original report issued in February 2002.The Tank Farm Vadose Zone Project is led by CH2M HILL Hanford Group, Inc. Their goals include defining risks from past and future single-shell tank farm activities, identifying and evaluating the efficacy of interim measures, and collecting geotechnical information and data. The purpose of these activities is to support future decisions made by the U.S. Department of Energy (DOE) regarding near-term operations, future waste retrieval, and final closure activities for the single-shell tank Waste Management Areas. To help in this effort, CH2M HILL Hanford Group, Inc. contracted with scientists at Pacific Northwest National Laboratory to analyze sediment samples collected from borehole 299-W23-19.Borehole 299-W23-19 was drilled at the southwestern edge of tank SX-115 as a characterization borehole to evaluate the depth distribution of contamination leaked from tank SX-115. The borehole was cored throughout the vadose zone during drilling. The geology, stratigraphy, and lithology of the drill core were described in the field and in the laboratory. The drill cores were sampled for analyses of physical, chemical, and hydraulic properties in order to better understand the distribution of contaminants and the mechanisms of contaminant movement beneath the SX tank farm.Electrical conductivity and chromium, nitrate, sodium, and technetium concentrations were found to be good indicators of the plume distribution. Data for the other measured contaminants indicate that leaked tank fluids have impacted the vadose zone beneath tank SX-115 from about 22.2 meters (73 feet) depth to the base of the upper Plio-Pleistocene unit at about a 47.5 meters (156 feet) depth. The technetium-99 plume, however, appears to occur as deep as 62.5 meters (205 feet), which is the depth of the deepest sample.The bulk of the leaked fluid beneath tank SX-115 resides in the upper Plio-Pleistocene unit between a 38.1 meters (125-feet) and 47.5 meters (156-foot) depth. This is slightly deeper than the contamination investigated at tank SX-108 and tank SX-109, both of which have the bulk of contamination in the shallower Hanford formation.Results of chemical analyses point to three potential mechanisms influencing the distribution of contaminants in the vadose zone. Common ion exchange reactions appear to have influenced the distribution of most mobile contaminants whereas oxidation-reduction reactions seem to have influenced chromium distribution. Observations from this study suggest that nitrate, technetium-99, and perhaps molybdenum migrate with no measurable retardation in the vadose zone whereas sodium, chromium, and selenium migrate with a small amount of retardation. These conclusions are similar to the conclusions found during the S...