2017
DOI: 10.1259/bjr.20160454
|View full text |Cite
|
Sign up to set email alerts
|

Characterization of a scintillating fibre detector for small animal imaging and irradiation dosimetry

Abstract: Objective: Small animal image-guided irradiators have recently been developed to mimic the delivery techniques of clinical radiotherapy. A dosemeter adapted to millimetric beams of medium-energy X-rays is then required. This work presents the characterization of a dosemeter prototype for this particular application. Methods: A scintillating optical fibre dosemeter (called DosiRat) has been implemented to perform real-time dose measurements with the dedicated small animal X-RAD® 225Cx (Precision X-Ray, Inc., No… Show more

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
3
1
1

Citation Types

0
7
0

Year Published

2018
2018
2023
2023

Publication Types

Select...
5

Relationship

1
4

Authors

Journals

citations
Cited by 6 publications
(7 citation statements)
references
References 28 publications
(43 reference statements)
0
7
0
Order By: Relevance
“…We previously developed and evaluated a prototype named DosiRat, specifically adapted to preclinical millimeter and orthovoltage beams. 16,17 This dosimeter showed a highly repeatable, reproducible and linear response with dose and dose rate in treatment beams. 9 It was also successfully used in preclinical relative dosimetry to measure percentage depth dose distributions in a 4  4 cm² irradiation field and to measure relative output factors at the surface of a phantom for irradiation fields as small as 2.5 mm diameter.…”
Section: Introductionmentioning
confidence: 95%
See 1 more Smart Citation
“…We previously developed and evaluated a prototype named DosiRat, specifically adapted to preclinical millimeter and orthovoltage beams. 16,17 This dosimeter showed a highly repeatable, reproducible and linear response with dose and dose rate in treatment beams. 9 It was also successfully used in preclinical relative dosimetry to measure percentage depth dose distributions in a 4  4 cm² irradiation field and to measure relative output factors at the surface of a phantom for irradiation fields as small as 2.5 mm diameter.…”
Section: Introductionmentioning
confidence: 95%
“…The dose measurements were performed with DosiRat scintillating fiber dosimeter, previously fully described by Le Deroff et al 16,17 In all this study, we used a BCF-12 (polystyrene based, Saint-Gobain Crystal, Paris, France) scintillating probe of 2 mm length and 1 mm diameter, presenting an effective measurement point at about 0.5 mm from its surface. DosiRat was calibrated in absorbed dose to water in a 4  4 cm² irradiation field at 225 kVp.…”
Section: Scintillating Fiber Dosimetrymentioning
confidence: 99%
“…Plastic scintillators have been used in megavoltage therapy, with a growing interest in examining their properties for kilovoltage energies [65][66][67]. Recently, plastic scintillators have been characterized and successfully validated for use in the 40 to 220 kVp tube voltage energy range within multiple small animal irradiators [49,[68][69][70][71][72]. Due to an energy dependence that is present for energies below 250 kVp, output must be corrected for by using a combination of mass-energy absorption coefficients, Monte Carlo (MC) obtained beam spectra information, and quenching corrections [66,71].…”
Section: Plastic Scintillator Detectorsmentioning
confidence: 99%
“…As the dosimeter design incorporates a PMMA optical fiber, it was necessary to consider the stem effect contributions to the fiber output signal. Many attempts have been made to quantify or discriminate such signals in optical fiber dosimeters for both kV and MV beam energies [8], [15]- [17]. Le Deroff et al [17] irradiated 194 cm of PMMA optical fiber lacking an active scintillating volume with beam energies set at 225, 100 and 40 kVp while applying maximum tube currents to maximize the stem effect signal (13, 30 and 45 mA for 225, 100 and 40 kVp, respectively).…”
Section: Introductionmentioning
confidence: 99%
“…Many attempts have been made to quantify or discriminate such signals in optical fiber dosimeters for both kV and MV beam energies [8], [15]- [17]. Le Deroff et al [17] irradiated 194 cm of PMMA optical fiber lacking an active scintillating volume with beam energies set at 225, 100 and 40 kVp while applying maximum tube currents to maximize the stem effect signal (13, 30 and 45 mA for 225, 100 and 40 kVp, respectively). The negligible signal generated in this experiment was indicative of the inability of beam energies ≤225 kV to produce secondary electrons capable of causing detectable Cerenkov effects within the optical fiber.…”
Section: Introductionmentioning
confidence: 99%