Characterisation of particles within and aerosols produced by nano-containing consumer spray products

Abstract

Nanoparticles have been incorporated into a range of consumer spray products, providing the potential for inadvertent inhalation by users and bystanders. The levels and characteristics of nanoparticle inhalation exposures arising from the use of such products are important inputs to risk assessments and informing dose regimes for in vitro and in vivo studies investigating hazard potentials. To date, only a small number of studies have been undertaken to explore both the aerosols generated from such products and the metal nanoparticles within them. The objective of the current study was to add to the limited data in this field by investigating a range of nano-containing spray products available within the UK. Six products were selected and the nanoparticles characterised using a combination of techniques, including: inductively coupled plasma mass spectrometry (ICP-MS), dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), transmission electron microscopy energy-dispersive X-ray spectroscopy (TEM-EDX) and single particle ICP-MS (spICP-MS). The aerosol produced by these products, when sprayed within a glovebox, was characterised by scanning mobility particle sizer (SMPS) and an aerodynamic particle sizer (APS). A cascade impactor with thirteen stages (NanoMOUDI) was used with one product to generate information on the size specific nanoparticle elemental distribution within the aerosol. The results demonstrated the presence of solid nanoparticles (silver, gold or silica) in each of the products at low concentrations (<13 ppm). TEM and (sp)ICP-MS provided reliable information on nanoparticle size, shape, number and mass, while the light scattering methods were less effective due to the complex matrices of the products and their lack of chemical specificity. The aerosols varied significantly across products, with particle and mass concentrations spanning 5 orders of magnitude (10 - 10 6 cm −3 and 0.3–7600 μg m −3 , respectively). The NanoMOUDI results clearly indicated non-uniform distribution of silver within different aerosol particle size ranges.

Triple-target stimuli-responsive anti-COVID-19 face mask with physiological virus-inactivating agents

“… 63 The particles were characterized by using the laser diffraction-based particle sizer Spraytec (Malvern Instruments, Malvern; UK) as described. 64 …”

“…The size of the liposomes was determined by dynamic light scattering (Zetasizer Nano ZS90; Malvern Instruments; Malvern; UK) as described. 64 …”

“…The size of the liposomes was determined by dynamic light scattering (Zetasizer Nano ZS90; Malvern Instruments; Malvern; UK) as described. 64 Incubation of virus-mimicking liposomes with tretinoin loaded "Ca-polyP-NP"…”

The Underlying Mechanism of Poisoning after the Accidental Inhalation of Aerosolised Waterproofing Spray

“…However, spraying also creates aerosols, in the form of tiny droplets, in the air during and after application as a direct result of spraying and overspray. Depending on the formulation, particles may also change size during and after application due to condensation and reaction processes [ 7 , 8 ]. These droplets can stay suspended in the air for an extended period of time after spraying and be inhaled and deposit in the lungs either during or after spraying.…”

Modelling Exposure by Spraying Activities—Status and Future Needs

“…Roitzsch et al [5] studied dermal and inhalation exposure of certified pest control operators resulting from spraying with vehicle-mounted and handheld spraying devices. Kim et al [28] characterized the behaviour of airborne particles generated from four categories of consumer spray products, and Laycock et al [29] studied consumer sprays containing nano particles.…”