Characterisation of MOS Transistors as an Electromechanical Transducer for Stress

Abstract

The influence of mechanical stress on field effect transistors is investigated using a pressure-deflected membrane for generation various mechanical stresses. It consists of a silicon membrane and transistors, which are designed and manufactured using 1.0 μm-XC10 technology from X-Fab. The transducers for sensing mechanical stress are placed on the edges with the maximum stress. Furthermore, the position is optimized by using FEM simulations (Ansys). Different variances of transistors and the impact on their electrical properties are investigated. Transistors are manufactured with different parameters such as channel lengths, widths, and alignments of the channel current to the direction of the mechanical stress, as well as connecting transistors in Wheatstone-like quarter and half bridges to generate a read-out voltage that is amplified using an integrated operational amplifier on the same chip. The bridge consists of p-MOSFETs as transducers on the membrane and n-MOSFETs as reference transistors (active loads). Transistors bridges are optimized on sensitivity, linearity and temperature behavior by varying channel length (L) and width (W). The influence of the membrane size and deposited technology layers is also investigated. The focus of this publication is presenting an analysis of the electrical behavior of the designed and manufactured transistors for different applied pressures. An experimental setup with a temperature and pressure calibrators is used for characterizing the transducers between 25 and 75 C and up to 1 bar differential pressure.

Ultra-High Sensitivity MEMS Pressure Sensor Utilizing Bipolar Junction Transistor for Pressures Ranging From −1 to 1 kPa

“…Potentially it is possible to consider sophisticated versions of amplifier circuit with an increased number of BJTs or metal-oxide-semiconductor field effect transistors (MOSFETs) or junction gate field-effect transistors (JFETs) [20][21][22][23][24][25][26], as well as with increased number of PR (more than 8 elements). Such development will require:…”

High-sensitivity MEMS pressure sensor utilizing bipolar junction transistor with temperature compensation

“…MEMS pressure sensors sales growth in 2016-2023 [1]. circuit [2,3] or on a single MOS transistor [4,5] having channel resistance modulated by applied pressure. Main advantage of such approach is related to smaller size of MOS transistor compared to size of piezoresistors.…”

High Sensitive, Linear and Thermostable Pressure Sensor Utilizing Bipolar Junction Transistor for 5 kPa

“…It is possible due to the BJT three-pole contact connection. One of development directions of similar PDA-NFL electrical circuits is the use of deformable or nondeformable metal-oxide-semiconductor transistors (MOSFETs) or junction gate field-effect transistors (JFETs) instead of BJT and change of PDA-NFL electrical circuit to more complex combinations [26][27][28][29][30][31][32] in the future. The use of active elements complicates both the design and fabrication of pressure sensor chip because competent integration of MEMS and CMOS processes is necessary [33].…”