CFD Simulation of Dilute Gas-Solid Flow in 90<sup>o</sup>Square Bend

Abstract

Gas-solid two-phase flow in a 90˚ bend has been studied numerically. The bend geometry is squared cross section of (0.15 m × 0.15 m) and has a turning radius of 1.5 times the duct's hydraulic diameter. The solid phase consists of glass spheres having mean diameter of 77 µm and the spheres are simulated with an air flowing at bulk velocity of 10 m/s. A computational fluid dynamic code (CFX-TASCflow) has been adopted for the simulation of the flow field inside the piping and for the simulation of the particle trajectories. Simulation was performed using Lagrangian particle-tracking model, taking into account one-way coupling, combined with a particle-wall collision model. Turbulence was predicted using k-ε model, wherein additional transport equations are solved to account for the combined gas-particle interactions and turbulence kinetic energy of the particle phase turbulence. The computational results are compared with the experimental data present in the literature and they were found to yield good agreement with the measured values.

CFD Analysis of Non-Newtonian Pseudo Plastic Liquid Flow through Bends

“…Aidar Kadyirov [20] numerically investigated the swirl flow in a curved tube with various curvature ratio. CFD simulation of dilute gas-solid flow in 90 0 squares bend was studied by Tarek A. Mekhail [21]. P.L.…”

Experimental and Numerical Study of Dilute Gas-Solid Flow inside a 90° Horizontal Square Pipe Bend

“…Mekhail et al [4] conducted CFD simulation of gassolid two-phase flow in a 90˚ bend. predicted the gas velocity vectors.…”

Simulation-Driven Design Optimization: A Case Study on a Double 900 Elbow Bend

“…turned to the techniques of computational fluid dynamics (CFD) in order to simulate the flow [1], [2].…”