Cationic microgel emulsion with a high solid content by a multistep addition method in inverse microemulsion polymerization

Abstract

The multistep addition of a monomer and initiator was developed to successfully synthesize cationic polyacrylamide microgels with solid contents (SCs) greater than 35% and cationic monomer concentrations of 0–40 mol % by inverse microemulsion polymerization. Two feed methods, three‐step nonuniform addition and five‐step uniform addition, were implemented to obtain microgel emulsions with 37% SC. The former addition method was designed according to the solubilization limit of the microemulsion before step polymerization, and that of the latter was a constant based on the remaining surfactant weight in the reactor. The product properties in the intermediate processes of these two methods were compared by dynamic light scattering and viscosity measurement. The results show that the products here were translucent microemulsions instead of milky ones when they were synthesized by a semicontinuous polymerization. Also, the particle sizes of these two methods were almost the same; this indicated that the oscillation phenomenon in continuous polymerization at a high SC was avoided. With the former feed method, the risk and operation cost in the synthesis process could be cut down greatly. Moreover, the viscosity of the cationic microgel emulsion conformed to the Krieger–Dougherty equation with a greater value of intrinsic viscosity than that of a hard‐sphere system because of an electroviscous effect. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40585.

Stimuli-Responsive Microgels and Microgel-Based Systems: Advances in the Exploitation of Microgel Colloidal Properties and Their Interfacial Activity

“…[ 34 , 63 , 64 , 65 , 66 , 67 , 68 , 69 ]. We suggest several research articles, review articles, and book chapters for detailed information on micro/nanogels synthesis by miniemulsion polymerization [ 34 , 62 , 70 , 71 , 72 , 73 , 74 , 75 , 76 ].…”

Formation of Microgels by Utilizing the Reactivity of Catechols with Radicals

“…Microgels are three-dimensional cross-linked colloidal particles, which swell in aqueous solution. Microgels possess simultaneously the unique properties of hydrogels and colloidal particles and have found wide potential applications in various fields like controlled release, separation technology, bio- and chemical sensors, etc. − Reported methods for the fabrication of microgels mainly include emulsion polymerization with added surfactant, surfactant-free emulsion polymerization (SFEP), inverse mini- and microemulsion polymerization, and cross-linking of prepolymer chains, etc. − The use of surfactant makes the resultant microgels suffering from residual surfactant contamination, which significantly disadvantages their applications, especially in biomedical fields. The cross-linking of prepolymer chains requires the prepolymers to be thermosensitive in aqueous solutions and usually leads to the microgels with relatively larger size distribution. − The microgels obtained by SFEP exhibit narrow particle size distribution (PSD) and do not suffer from residual surfactant contamination, which is crucial for their potential applications in biomedical fields.…”

Cationic polyacrylamide emulsion with ultra-high concentration as a flocculant for paper mill wastewater treatment

“…For example, it can flocculate colloids with negative charges (Xu et al 2014) and has the functions of decolorization, adsorption, adhesion, and turbidity removal (Ochoa et al 2006;Patel et al 2011). It is widely used for treatment of papermaking wastewater having high organic impurities (Swerin 1998;Solberg and Wagberg 2003;Schwarz et al 2007;Yoon et al 2012), dyeing and finishing (Yang et al 2013;Gupta et al 2015), mineral processing (Zhou and Franks 2006;Ji et al 2013), oil field (Guo et al 2014Li et al 2014), food (Pinotti et al 2001), and brewing industries (Liu and Jin 2009). It is used in the dewatering treatment of municipal sludge (Zheng et al 2014), paper-making sludge (Wu et al 2019), and other industrial sludge (Besra et al 2003;Wang et al 2019).…”