This work presents first results obtained with partly scale resolving simulation for two different installation noise problems involving a cold jet interacting with a wing. Similar to very large-eddy simulation (VLES), the resolvable very large scales of turbulent fluctuations are directly calculated and the dissipation of the non-resolved scales is accounted for by a subfilter scale stress model. In addition, stochastic forcing in space and time is applied to model turbulent backscatter. The paper presents and discusses the rationale to explicitly realize turbulent backscatter along with details of the proposed stochastic backscatter model and its calibration. As a novel approach, the entire subfilter forcing function is modeled by means of an eddy-relaxation source term that provides a combined model for forcing and dissipation. The relaxation parameter defines the amount of correlation of the subfilter forcing with resolved quantities. Its proper calibration is achieved using decaying homogeneous isotropic turbulence. Furthermore, characteristics of the backscatter forcing are analyzed from synthetic turbulence data. The first jet-wing interaction problem studied is based on a generic static jet interacting with a non-inclined rectangular wing. The second problem deals with a dual-stream nozzle installed at a high-lift wing with deployed flap and slat in wind tunnel flow under approach conditions. For both problems installation noise from the airframe yields higher peak levels than the jet-noise contribution alone. For the first problem, relative to the corresponding jet spectrum a low-frequency narrow-band contribution is observed that can be attributed to coherent jet structures interacting with the airfoil trailing edge. Very good agreement with measured spectra is obtained. For the second problem a broadband airframe installation contribution to the overall spectrum is predicted with peak frequency above the jet contribution.