Calibration of Collision Recovery Coefficient of Corn Seeds Based on High-Speed Photography and Sound Waveform Analysis

Abstract

Compared with the movement of corn seeds in the sowing machine, the movement in the threshing machine is more intense. The collision between corn seeds and threshing parts and other corn seeds will not only change the movement path of corn seeds in the threshing clearance but also cause damage to corn seeds. Therefore, when using discrete element simulation technology to optimize the critical components of corn threshing machinery, it is necessary to measure corn seeds’ accurate collision recovery coefficient. However, when measuring the collision recovery coefficient between corn seeds, there will be multi-point collisions between corn seeds, affecting the measurement results’ accuracy. In order to solve this problem, this study combined high-speed photography and the sound waveform of corn seed collision to eliminate the interference of the multi-point collision phenomenon and improve the accuracy of measurement results. According to the above test method, the contact parameters of corn seeds were measured. Finally, the corn–corn rolling friction coefficient and corn–PMMA rolling friction coefficient were 0.0784 and 0.0934, respectively. The corn–corn static friction coefficient was 0.32, and the corn–PMMA static friction coefficient was 0.445. The corn–corn collision recovery and corn–PMMA collision recovery coefficients were 0.28 and 0.62, respectively. After that, the method’s reliability and the measurement results’ accuracy were verified by the plane collision test and repose angle test.