Calculation of overlapping pixels in interleaving assembly of CCD focal plane of mapping camera

Jiang, 郭疆 Guo; Da-peng, 龚大鹏 Gong; Lei, 朱磊 Zhu; Ji-ming, 孙继明 Sun; Ming-dong, 邵明东 Shao

doi:10.3788/ope.20132105.1251

Cited by 2 publications

(2 citation statements)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…To achieve the required imaging swath width, the detector scale needs to ensure at least 4 K × 4 K in image resolution. Optical stitching using four CMOS detectors is required for field of view expansion, and the optical system design should allow for sufficient back-working distance to accommodate the placement of a reflective prism assembly [14]. Based on the input of system technical indicators and the selected parameters of the high-sensitivity CMOS detector, the design parameters of the optical system were determined, as shown in Table 2.…”

Section: Optical Systemmentioning

confidence: 99%

Section: Optical Systemmentioning

confidence: 99%

See 1 more Smart Citation

Design of a Large-Format Low-Light Imaging System Based on the RGB Filter Wheel

Peng,

Yang,

Song

et al. 2023

Photonics

View full text Add to dashboard Cite

In order to capture true-color information of distant targets under extremely low light, a large-format low-light imaging system is designed based on an RGB filter wheel. By decomposing the system indicators, this study proposes a method for acquiring low-light true-color images using a large-aperture, low-distortion optical lens combined with an RGB filter wheel capable of multi-line sequential exposure. The optical field segmentation is achieved using a four-panel optical reflective prism, and the images from four high-sensitivity SCOMS detectors are stitched together to form a composite image. The working principle of the system is explained, and the low-light imaging capability is thoroughly evaluated. The dimensions and rotation speed of the filter wheel are then calculated in detail, ensuring accurate synchronization of the filter wheel’s speed and exposure time. The calculation method for the parameters of the four-panel reflective prism structure is investigated, mathematical expressions for the geometric parameters of the prism assembly are provided, and a prism assembly suitable for four-way spectral separation is designed. Based on the research and design results, a large-swath-width, low-light true-color imaging system is developed that is suitable for an environmental illuminance of 0.01 lux. The system achieves a ground pixel resolution of 0.5 m (at an altitude of 5 km) and an effective image resolution of 4 K × 4 K, and is capable of accurately reproducing target color information. Laboratory and field flight tests verified that the large-swath-width images obtained by the imaging system are clear, with high contrast and resolution. After image fusion and spectral registration, the color images exhibit full saturation and high fidelity, meeting the requirements of low-light true-color imaging under airborne conditions. The design methodology of this low-light imaging system can serve as a reference for the development of airborne low-light imaging equipment.

show abstract

Section: Optical Systemmentioning

confidence: 99%

Section: Optical Systemmentioning

confidence: 99%

Design of a Large-Format Low-Light Imaging System Based on the RGB Filter Wheel

Peng,

Yang,

Song

et al. 2023

Photonics

View full text Add to dashboard Cite

show abstract

Design of an Airborne Low-Light Imaging System Based on Multichannel Optical Butting

Peng,

Yang,

Lei

et al. 2024

Photonics

View full text Add to dashboard Cite

For the purpose of achieving long-range, high-resolution, and ultra-wide-swath airborne earth imaging at extremely low-light levels (0.01 Lux), a low-light imaging system built on multi-detector optical butting was researched. Having decomposed the system’s specifications and verified its low-light imaging capability, we proposed to employ an optical system with a large relative aperture and low distortion and achieve imaging through the field-of-view (FOV) butting facilitated by eight 1080P high-sensitivity scientific complementary metal-oxide semiconductor (SCMOS) detectors. This paper elaborates on the design concept of the mechanical configuration of the imaging system; studies the calculation method of the structural parameters of the reflection prism; provides mathematical expressions for geometric parameters, such as the length and width of the splicing prism; and designs in detail the splicing structure of six reflection prisms for eight-channel beam splitting. Based on the design and computational results, a high-resolution, wide-swath imaging system for an ambient illuminance of 0.01 Lux was developed. Exhibiting a ground sampling distance (GSD) of 0.5 m (at a flight height of 5 km), this low-light imaging system keeps the FOV overlap ratio between adjacent detectors below 3% and boasts an effective image resolution of 4222 × 3782. The results from flight testing revealed that the proposed imaging system is capable of generating wide-swath, high-contrast resolution imagery under airborne and low-light conditions. As such, the way the system is prepared can serve as a reference point for the development of airborne low-light imaging devices.

show abstract

Calculation of overlapping pixels in interleaving assembly of CCD focal plane of mapping camera

Cited by 2 publications

References 0 publications

Design of a Large-Format Low-Light Imaging System Based on the RGB Filter Wheel

Design of a Large-Format Low-Light Imaging System Based on the RGB Filter Wheel

Design of an Airborne Low-Light Imaging System Based on Multichannel Optical Butting

Contact Info

Product

Resources

About