Calculating loads and life-time reduction of wind turbine gearbox and generator bearings due to shaft misalignment

Abstract

During the last two decades, wind turbine industries have faced high failure rates, downtimes and costly repairs. Gearbox and generator have contributed to this, especially, because their high speed shaft bearings have often failed. In this article, an analytical method is proposed to calculate the reaction loads of flexible connecting couplings installed between wind turbine gearbox and generator. Raction loads are determined from joint kinematics and metal disk pack deformations as well as axial and angular shaft misalignment. The calculations are executed for both flexible connecting couplings and a universal joint shaft and applied to the gearbox high speed shaft. The performance of flexible connecting couplings and universal joint shaft is compared with respect to the bearing loads and life-time of the gearbox high speed shaft. It is shown that the early, unplanned bearing failures of gearbox and generator high speed shaft can often be attributed to the flexible connecting couplings installed between gearbox and generator.

Design and optimization of permanent magnet synchronous generator dedicated to direct-drive, high power wind turbine

“…The action of the wind on the blades results in a force and a torque that drives their rotation. The kinetic energy of the wind is thus transformed into mechanical energy of rotation (Rommel et al, 2021). This ''rotating'' energy is then transformed into electrical energy by a generator (Figure 2).…”

PrimaVera: Synergising Predictive Maintenance

“…The first challenge is the gap between component and system level. Most of the methods available in literature predict failures on a component level, e.g., for bearings [43], rail [44] or vehicle tracks [45]. However, asset owners are interested in the availability and expected failure of the complete system [46].…”

Modelling of Drive System Operation of a Wind Power Plant

“…In wind power plants, using hydrodynamic elements, such as clutches, torque converters and brakes, is justified by the fact that they are machine components with high durability. Increasing the durability of drive systems is currently one of the most fundamental directions of developmental works concerning wind power plants [14,15]. In turn, weight is highly important in highaltitude wind power plants placed in balloons or kites [16].…”