Building a Practical Natural Laminar Flow Design Capability

Abstract

A preliminary natural laminar flow (NLF) design method that has been developed and applied to supersonic and transonic wings with moderate-to-high leading-edge sweeps at flight Reynolds numbers is further extended and evaluated in this paper. The modular design approach uses a knowledge-based design module linked with different flow solvers and boundary layer stability analysis methods to provide a multifidelity capability for NLF analysis and design. An assessment of the effects of different options for stability analysis is included using pressures and geometry from an NLF wing designed for the Common Research Model (CRM). Several extensions to the design module are described, including multiple new approaches to design for controlling attachment line contamination and transition. Finally, a modification to the NLF design algorithm that allows independent control of Tollmien-Schlichting (TS) and cross flow (CF) modes is proposed. A preliminary evaluation of the TSonly option applied to the design of an NLF nacelle for the CRM is performed that includes the use of a low-fidelity stability analysis directly in the design module.

Aerodynamic Optimization and Analysis of Low Reynolds Number Propeller with Gurney Flap for Ultra-High-Altitude Unmanned Aerial Vehicle

“…In this study, the CFD method was used to realize high-fidelity calculations of the airfoil and propeller [25]. Reynolds-averaged Navier Stokes (RANS) equations were the governing equations, and finite volume method and second-order upwind scheme were used.…”

Simplified Hybrid Laminar Flow Control for the A320 Fin. Part 2: Evaluation with the eN-method

“…Lately, a new discussion on the value for the transition -factor to be used with compressible stability theory has arisen in the context of the NASA NLF common research model and the Crossflow-Attenuated NLF design [17][18][19][20]. The question is whether = 10 is adequate when using compressible stability theory.…”

Hybrid Laminar Flow Control Optimizations for Infinite Swept Wings

“…attachment line transition, TS instabilities, CF instabilities, and bypassinduced transition. In the laminar flow wing design, the attachment line transition can be diverted with the help of a "Gaster bump" [17]. CF instability is the second phenomenon that induces transition.…”