Biogenic Production of Thiosulfate from Organic and Inorganic Sulfur Substrates for Application to Gold Leaching

Abstract

Gold mining and processing is an activity with large environmental impact due to the low concentration of gold in ore deposits and chemical resistance to most chemicals. Over 75% of gold is leached from ores using cyanide, however less toxic lixiviants have been proposed in the literature. Thiosulfate is one of these alternative reagents, but high reagent consumption has slowed acceptance in mining operations. Reducing the cost and impact of thiosulfate production is a way to reduce the cost of reagent consumption during leaching. The objective of this study was to evaluate the feasibility of leaching gold from ore with biogenic thiosulfate. Biogenic thiosulfate was produced using a marine methylotroph bacterium from three substrates: sodium sulfide, elemental sulfur, and dimethyl sulfide for application in bioleaching. The different substrates were evaluated to determine conversion efficiency from the sulfur source to biogenic thiosulfate and verified by titration and ion chromatography. Optimal conditions for conversion to thiosulfate were determined to be in the range of pH = 7–8, 25–30 °C, with sodium sulfide as a substrate in a sealed system to prevent sulfide from escaping as hydrogen sulfide gas. An oxide gold ore with a grade of 4.02 g/t was selected as a gold source for leaching experiments. The leaching of gold using the biogenic thiosulfate was compared with chemical thiosulfate solutions under experimental conditions of pH = 9.5, 50 mg/L copper, 500 RPM mixing, and 0.1 L/min air. The efficiency of gold bioleaching was measured using flame atomic absorption spectroscopy and fire assay. Gold extraction efficiencies ranging from 20–60% were achieved using the biogenic thiosulfate, and 27–77% with sodium thiosulfate solutions, respectively. It was concluded that the sodium sulfide substrate was best for producing higher biogenic thiosulfate concentrations and leaching efficiency.

Sustainable Recovery of Platinum Group Metals from Spent Automotive Three-Way Catalysts through a Biogenic Thiosulfate-Copper-Ammonia System

“…As a result of these microbial activities, thiosulfate (S 2 O 3 2− ) is produced as a generally considered undesirable byproduct [26,27]. Biologically produced thiosulfate has been recently used in leaching processes for the recovery of gold and silver [28][29][30]. In the study conducted by McNeice et al [30], they reported gold extraction efficiencies spanning a range from 20 to 60%.…”

“…Biologically produced thiosulfate has been recently used in leaching processes for the recovery of gold and silver [28][29][30]. In the study conducted by McNeice et al [30], they reported gold extraction efficiencies spanning a range from 20 to 60%. This was achieved through the utilization of biogenic thiosulfate, following the production of approximately 400 mg L −1 of biogenic thiosulfate with the aid of sodium sulfide (Na 2 S) (chemical source) in conjunction with M. sulfidovorans (DSMZ 11578).…”