Biodegradable Magnesium Alloys for Personalised Temporary Implants

Abstract

The objective of this experimental work was to examine and characterise the route for obtaining demonstrative temporary biodegradable personalised implants from the Mg alloy Mg-10Zn-0.5Zr-0.8Ca (wt.%). This studied Mg alloy was obtained in its powder state using the mechanical alloying method, with shape and size characteristics suitable for ensuing 3D additive manufacturing using the SLM (selective laser melting) procedure. The SLM procedure was applied to various processing parameters. All obtained samples were characterised microstructurally (using XRD—X-ray diffraction, and SEM—scanning electron microscopy); mechanically, by applying a compression test; and, finally, from a corrosion resistance viewpoint. Using the optimal test processing parameters, a few demonstrative temporary implants of small dimensions were made via the SLM method. Our conclusion is that mechanical alloying combined with SLM processing has good potential to manage 3D additive manufacturing for personalised temporary biodegradable implants of magnesium alloys. The compression tests show results closer to those of human bones compared to other potential metallic alloys. The applied corrosion test shows result comparable with that of the commercial magnesium alloy ZK60.

Закономірності Отримання Порошків Сплавів Магнію Розпиленням Розплаву

“…Суміш газів SF6-CO є ефективним для отримання сплавів магнію литвом, але за рахунок високої токсичності та накопичення в атмосфері вказану суміш виводять з використання. Перспективним методом щодо отримання магнієвих сплавів є порошкова металургія[8]. Під час отримання порошків магнію застосовується розпилювання у вакуумі інертним газом[9].…”