Bevel Gearbox Fault Diagnosis using Vibration Measurements

Abstract

Abstract.The use of vibration measurementanalysis has been proven to be effective for gearbox fault diagnosis. However, the complexity of vibration signals observed from a gearbox makes it difficult to accurately detectfaults in the gearbox. This work is based on a comparative studyof several time-frequency signal processing methods that can be used to extract information from transient vibration signals containing useful diagnostic information. Experiments were performed on a bevel gearbox test rig using vibration measurements obtained from accelerometers. Initially, thediscrete wavelet transform was implementedfor vibration signal analysis to extract the frequency content of signal from the relevant frequency region. Several time-frequency signal processing methods werethen incorporated to extract the fault features of vibration signals and their diagnostic performances were compared. It was shown thatthe Short Time Fourier Transform (STFT) could not offer a good time resolution to detect the periodicity of the faulty gear tooth due the difficulty in choosing an appropriate window length to capture the impulse signal. The Continuous Wavelet Transform (CWT), on the other hand, was suitable to detection of vibration transients generated by localized fault from a gearbox due to its multi-scale property. However, both methods still require a thorough visual inspection. In contrast, it was shown from the experiments that the diagnostic method using the Cepstrumanalysis could provide a direct indication of the faulty tooth without the need of a thorough visual inspection as required by CWT and STFT.

Using Transfer Learning and Radial Basis Function Deep Neural Network Feature Extraction to Upgrade Existing Product Fault Detection Systems for Industry 4.0: A Case Study of a Spring Factory

“…They filtered and disassembled the data before selecting useful signal features for fault detection. Hartono et al [27] posited that different types of data have different signal characteristics and important features, so they proposed integrated approaches for feature selection.…”

Time-frequency methods of non-stationary vibroacoustic diagnostic signals processing

“…2. Time-frequency representation of the vibrations of the damaged conical gear [13] Fig. 2 presents the JTFA representation of the signal of vibration accelerations recorded during the operation of the conical gear with the damaged single tooth -the defect in the form of injured structure and broken part of the tooth.…”