Behavioral Investigations of Three Parallel Large Reinforced Concrete Circular Pipes with the Construction of Pipe Jacking

Abstract

The pipe jacking method is gradually attracting increasing levels of attention and is becoming an important method for constructing underground engineering. However, jacking large-size concrete pipes in urban core areas subjected to complicated geological conditions is still a big problem preventing the employment of the pipe jacking method, and further studies related to pipe jacking are required. This paper presents a case study on the construction of three parallel large-size reinforced concrete circular pipes in the upper-soft and lower-hard composite formations, in which the construction work was implemented using the slurry balance pipe jacking method with the sequence of jacking the 1# and 3# pipes prior to the 2# pipe being implemented in field construction. This case study was implemented by employing numerical simulations with the aforementioned pipe jacking sequence, which focused on the stress and deformation variations of the reinforced concrete circular pipes, as well as the vertical settlement of the ground surface during the jacking processes, and considering the influences from the excavation pressure and grouting pressure of the drag-reducing thixotropic slurry. The simulation results revealed that a higher excavation pressure from the pipe jacking machine can easily induce an excessive pushing and squeezing effect of the excavated soil with the uplift phenomenon, while the increasing grouting pressure can be used to reduce the overall vertical settlement of the ground surface, whereas an excessive grouting pressure may have no effectiveness on protecting the reinforced concrete circular pipes. This work provides the numerical foundations for investigating the behavior of jacked parallel large-size reinforced concrete circular pipes.

Behavior of Horizontal-Directional Drilling for Multi-Pilot Heading Pretreating Blind Spots in Pipe Jacking Construction

“…However, the construction of underground engineering projects may encounter great difficulty such as complex geological and topographical conditions and adjacent existing infrastructure with smaller distances [6,7], and various construction technologies and equipment have been gradually developed for constructing underground engineering projects. Compared to traditional open-excavation technologies used for constructing underground engineering projects, the application of non-excavation construction technology has obvious advantages in building urban underground engineering projects, which can reduce the occupation of ground surfaces and the migration of obstacles above or below the ground [8]. Moreover, non-excavation construction technology can also reduce the impact on the safety of the surface traffic and surrounding buildings, protect the urban environment and accelerate engineering construction progress, and it can also promote the rational and standardized utilization of the urban underground space [9].…”

“…In the various non-excavation construction technologies, the pipe jacking method has been widely used in soft soil layers due to the rapid development of construction equipment and technology [8,9]. In particular, pipe jacking machines with a rectangular cross-section can fully utilize the cross-section of underground structures, which can thus effectively save urban underground space in the construction of urban underground engineering projects.…”